Skip to the content
2 layers39.3 × 55 mmNK BMS, the printed circuit board in 3D

A compact Li-Ion/Li-Po battery charging module based on the MCP73831 with input protection, status indication, and a clean 2-layer PCB design.

Size
39.3 × 55 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
7
Pads
34
Tracks, vias
30, 175
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
26 Jun 2025
Updated
29 Oct 2025

Overview

NK BMS is an open-source printed circuit board by NishanthKiruthivasan, from the NishanthKiruthivasan/BMS repository on GitHub, published under the MIT licence. It is a 2-layer board of 39.3 × 55 mm with 15 parts on 7 nets, routed with 30 tracks and 175 vias.

It is built around the MCP73831T-2ACI/OT-HXY and PTVS5V0Z1USKYL. Its parts include 3 capacitors, 2 resistors, 2 diodes, 2 connectors and 1 IC. It belongs with the power boards of this library.

Main components

2

README

README.md

🔋 Li-Ion Battery Charging Module with MCP73831

This project is a compact and reliable single-cell Li-Ion/Li-Po battery charging board using the MCP73831T-2ACI/OT linear charger IC. Designed for prototyping, IoT devices, and embedded systems requiring safe and simple battery charging from a 5V USB or adapter input.


📦 Features

  • ✅ Input overvoltage and surge protection (TVS diode + fuse)
  • ✅ Single-cell Li-Ion/Li-Po battery charging (4.2V, 500 mA)
  • ✅ Charging status LED indicator (ON during charging, OFF when fully charged)
  • ✅ Clean and simple 2-layer PCB design
  • ✅ Output connector for system power
  • ✅ Mounting holes and large battery cutout for easy integration

⚙️ Technical Specifications

ParameterValue
Charging ICMCP73831T-2ACI/OT
Input Voltage5V DC
Charging Current500 mA (set via 2 kΩ resistor)
Battery Voltage3.7V Nominal (4.2V max)
Capacitors10µF & 4.7µF Ceramic
ProtectionsFuse, TVS Diode

🧩 Schematic & PCB

The design is created using KiCad and includes:

  • Complete schematic (.sch)
  • PCB layout (.kicad_pcb)
  • Gerber files for fabrication
  • Bill of Materials (BOM)

🛡️ Battery Protection

⚠️ Note: This board does not include battery protection circuitry.
Use protected Li-Ion cells or add an external battery protection module (e.g., DW01 + FS8205A) to ensure safe operation.


🖼️ Preview

📷 PCB Layout (Top View)

image

📄 Schematic PDF

View Schematic PDF


📁 License

This project is licensed under the MIT License.
Feel free to use, modify, and distribute with attribution.


🤝 Contributions

Pull requests and suggestions are welcome!
Feel free to open issues for improvements or bugs.


📧 Contact

Created by Nishanth Kiruthivasan
📬 nishvask@gmail.com | kiruthivasan.n@northeastern.edu

🔗 Website

Parts

15
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.1mmH1, H2, H3, H4
24.7uF/16VCapacitor_SMD:C_0805_2012MetricC2, C3
110uF/16VCapacitor_SMD:C_0805_2012MetricC1
12KResistor_SMD:R_0805_2012MetricR1
1470Resistor_SMD:R_0805_2012MetricR2
1CHARGINGLED_SMD:LED_0805_2012MetricD2
1Conn_01x02_PinBattery:BatteryHolder_Bulgin_BX0034_1xAAACN2
1Conn_01x02_PinConnector_BarrelJack:BarrelJack_CUI_PJ-063AH_HorizontalCN1
1FuseFuse:Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mmF1
1MCP73831T-2ACI_OTPackage_TO_SOT_SMD:SOT-23-5_HandSolderingU1
1PTVS5V0Z1USKDiode_SMD:Nexperia_DSN1608-2_1.6x0.8mmD1

Similar boards

  • 8 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    cdg66/ExAce

    Framework ExpansionFPGA acceleration module

    207 parts37CC-BY-4.0
  • 4 layers100 × 75 mmOpenAirScope, the printed circuit board in 3D

    OpenAirScope

    emertcakir/OpenAirScope

    Open-source air quality and environmental monitoring node with STM32H743 + ESP32-C3, LoRaWAN, RS485, USB-C, Li-ion charging, and multi-sensor support.

    282 parts26MIT
  • 4 layers52.7 × 42.5 mmOmniProbe, the printed circuit board in 3D

    OmniProbe

    emertcakir/OmniProbe

    Open-source SWD, JTAG, UART, SPI, I2C and Logic Analyzer platform powered by RP2040

    77 parts4MIT
  • 2 layers99.5 × 99.5 mmBalancer, the printed circuit board in 3D

    Balancer

    kwiecinski/BMS-and-offgrid-photovoltaic-management-system

    Project contains BMS for lead-acid batteries and ESP-based board used to pull information from EASUN offgrid inverter, energy meters and sensors.

    173 parts3MIT
  • 2 layers66.6 × 41.3 mmUPIC46, the printed circuit board in 3D

    UPIC46

    emertcakir/uPIC46

    PIC18F46K22-based versatile development board with CAN, RS-485, EEPROM, RTC, and user LEDs

    111 parts2MIT
  • 4 layers66.2 × 48 mmNOVQCOREV1, the printed circuit board in 3D

    NOVQCOREV1

    Durgpratap07/NovaCore-V1

    Professional open-source STM32G431 development platform featuring a 4-layer PCB, USB Type-C, modular interfaces, and production-inspired hardware design for embedded systems development.

    49 parts1
  • 2 layers40.5 × 27 mmNewProjectSTP, the printed circuit board in 3D

    NewProjectSTP

    An0d3-hue/KiCad-mini-workshop

    8 parts
  • 4 layers100 × 100 mmData logger, the printed circuit board in 3D

    Data logger

    Conor-Dunlop/FYP_datalogger

    render of the datalogger with power board (yes i know it need routed)

    176 parts

Questions

How big is the NK BMS PCB?

It measures 39.3 × 55 mm and has 2 copper layers, 1.6 mm thick.

What parts does the NK BMS use?

15 parts, built around the MCP73831T-2ACI/OT-HXY and PTVS5V0Z1USKYL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the NK BMS KiCad files?

From the NishanthKiruthivasan/BMS repository on GitHub, at the commit this page was made from: the board is NK_BMS.kicad_pcb and its schematic NK_BMS.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the NK BMS design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).