
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Aegis is an open-source printed circuit board by NipunD58, from the NipunD58/Aegis---USB-Remote-Executor repository on GitHub. It is a 2-layer board of 12.1 × 8.2 mm with 14 parts on 31 nets, routed with 45 tracks and 5 vias.
Its parts include 4 transistors, 3 capacitors, 2 ICs, 1 resistor and 1 connector. It belongs with the STM32 boards of this library.
Implement a USB HID Human Interface Device that is affordable. Perform IR signal detection using a built-in sensing circuit. Translate IR signals into HID actions. Support plug and play compatibility without the need for drivers. Implement a reliable communication interface between embedded hardware and the computer. Main Features USB HID-compliant device. IR signal detection and translation. Embedded control based on STM32F042 microcontroller. No drivers needed for current operating systems. Small form factor and low power consumption hardware design. Custom HID actions through firmware programming.
The USB HID IR Trigger Device showcases a practical example of the combination of embedded systems, IR sensing technology and USB protocol. Using the capabilities of the STM32F042 microcontroller and the USB HID protocol, the device translates IR triggered events into computer actions in driverless manner. The project shows the design and implementation of the small and cost-effective hardware solution that can be used for a variety of automation, accessibility and remote control applications. Through USB enumeration, IR detection and HID report creation, the project proves the practicality of using embedded USB devices for human-computer interactions.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Würth 1541201NC3060 | footprints:LED_1206_3216Metric_IPC_C | Q1, Q2, Q3, Q4 |
| 3 | ~ | footprints:TestPoint_Pad_D0.8mm | TP1, TP2, TP3 |
| 2 | 1µ | footprints:C_0402_1005Metric_noSS | C2, C3 |
| 1 | 2k2 | footprints:R_0402_1005Metric_noSS | R2 |
| 1 | 4.7µ | footprints:C_0402_1005Metric_noSS | C1 |
| 1 | NCP115AMX330TCG | Package_DFN_QFN:OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm | U2 |
| 1 | STM32F042G6Ux | Package_DFN_QFN:QFN-28_4x4mm_P0.5mm | U3 |
| 1 | USB_A | footprints:usb-PCB | J1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS


It measures 12.1 × 8.2 mm and has 2 copper layers, 0.4 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NipunD58/Aegis---USB-Remote-Executor repository on GitHub, at the commit this page was made from: the board is PCB Files/Aegis.kicad_pcb and its schematic PCB Files/Aegis.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NipunD58 before reusing the design.