Skip to the content
4 layers127 × 101.6 mmNicholas Melendez EtchASketch, the printed circuit board in 3D

Nicholas Melendez EtchASketch

NicholasMelendez/EDES301
Size
127 × 101.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
24
Nets
23
Pads
142
Tracks, vias
170, 7
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
6 Feb 2026
Updated
6 May 2026

Overview

Nicholas Melendez EtchASketch is an open-source printed circuit board by NicholasMelendez, from the NicholasMelendez/EDES301 repository on GitHub, published under the MIT licence. It is a 4-layer board of 127 × 101.6 mm with 24 parts on 23 nets, routed with 170 tracks and 7 vias.

Its parts include 5 resistors, 3 diodes, 2 switches and 1 IC.

README

README.md

EDES301

Repository for EDES301 course work

Parts

24
QtyValueFootprintReferences
6FIDUCIALFIDUCIAL_40MILFUD1, FUD2, FUD3, FUD4, FUD5, FUD6
4MOUNTING_HOLEMOUNTING_HOLEMGT1, MGT2, MGT3, MGT4
31kR0603R3, R4, R5
2POTENTIOMETERPOT-PO90SR1, R2
2PUSH_BUTTONBUTTON_12.5MMSW1, SW2
1292303-1TE_292303-1USBPORT0
1BLUE_LEDEIA-STDD1
1GREEN_LEDEIA-STDD2
1LOGONicholas_Melendez_EtchASketch:Nicholas_Melendez_GOJONicholas M.
1POCKETBEAGLEPOCKETBEAGLEU1
1RED_LEDEIA-STDD3
1SCREENSCREENSPIDISPLAY0

Similar boards

  • 4 layers38 × 38 mmEthersweep, the printed circuit board in 3D

    Ethersweep

    Neumi/ethersweep

    Open Source, easy to use Ethernet connected stepper motor controller. Built in FreeCAD, KiCAD and Arduino.

    24 parts587
  • 4 layers192.1 × 126.9 mmStradex1, the printed circuit board in 3D

    Stradex1

    Bylin-code/Stradex1

    STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…

    24 parts101
  • 4 layers87.4 × 19.4 mmXboxUSB C, the printed circuit board in 3D

    XboxUSB C

    Redherring32/Xbox-Portable

    Fully portable original (2001) Xbox handheld using real hardware

    24 parts93
  • 4 layers25 × 36.5 mmMAX M10S Passive, the printed circuit board in 3D

    MAX M10S Passive

    John-owo/pcb-agent-workflow

    用 Claude Code/Codex 搭配 KiCad 10 設計 PCB、交 JLCPCB 製造的工作流程:流程文件、專案範本、JLC 客服溝通 skill、生產稿比對腳本與範例設計

    24 parts76MIT
  • 4 layers35.1 × 25.3 mmDualClockLO, the printed circuit board in 3D

    DualClockLO

    DRWJSCHMIDT/T41

    This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.

    24 parts66
  • 4 layers14.8 × 38.8 mmPocket knife sense, the printed circuit board in 3D

    Pocket knife sense

    unsurv/NFC_temp

    passive temperature NFC tag

    24 parts49
  • 4 layersTiav3 s13360 3030VE, the printed circuit board in 3D

    Tiav3 s13360 3030VE

    OpenSiPM/sipm-bias-control

    Single channel silicon photomultipliers for high-speed fluorescence imaging

    24 parts44
  • 4 layers65 × 30 mmGimmeGPIO, the printed circuit board in 3D

    GimmeGPIO

    mayermakes/GimmeGPIO

    hardware to add GPIO to any PC running Linux

    24 parts35GPL-3.0

Questions

How big is the Nicholas Melendez EtchASketch PCB?

It measures 127 × 101.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Nicholas Melendez EtchASketch use?

24 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nicholas Melendez EtchASketch KiCad files?

From the NicholasMelendez/EDES301 repository on GitHub, at the commit this page was made from: the board is project_02/KiCad/Nicholas_Melendez_EtchASketch.kicad_pcb and its schematic project_02/KiCad/Nicholas_Melendez_EtchASketch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nicholas Melendez EtchASketch design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).