
Calculator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Note that codelayer and btlayer in stealth.keymap currently use plain US &kp codes (e.g. &kp ATSIGN) rather than the DE macros, so those two layers assume a US layout and won't produce the labeled character under a…
Keyboard pcb is an open-source printed circuit board by Neil-Reichlin, from the Neil-Reichlin/Stealth repository on GitHub. It is a 2-layer board of 145.2 × 116.5 mm with 74 parts on 73 nets, routed with 1,140 tracks and 75 vias.
Its parts include 27 diodes and 27 switches. It belongs with the keyboards and input boards of this library.
Stealth is a fully custom-built ergonomic split keyboard. This repository provides the adapted ZMK firmware.
ZMK provides US keycodes by default, and firmware/config is written in terms of them.
This keyboard's default layer instead uses the Swiss German character macros defined in
include/locale/keys_de_swiss.h (the DE_* codes below), which only produce the correct
character when your OS's keyboard layout is set to Swiss German - each macro sends the
raw physical-key code for wherever that character sits on a real Swiss keyboard, and it's
your OS's layout setting that turns that into the right character. If your OS is set to a
plain US layout instead, these keys will type their US character (e.g. DE_MINUS would
type / instead of -).
Note that code_layer and bt_layer in stealth.keymap currently use plain US &kp codes
(e.g. &kp AT_SIGN) rather than the DE_* macros, so those two layers assume a US layout and
won't produce the labeled character under a Swiss OS layout.
Use these instead of the plain US &kp codes whenever you want the printed Swiss/German
character (with your OS set to a Swiss German layout). Full list in
include/locale/keys_de_swiss.h.
| Character | ZMK code |
|---|---|
ä | DE_A_UMLAUT |
ö | DE_O_UMLAUT |
ü | DE_U_UMLAUT |
à | DE_A_GRAVE |
è | DE_E_GRAVE |
é | DE_E_ACUTE |
ç | DE_C_CEDILLA |
¨ (diaeresis) | DE_UMLAUT |
´ (acute accent) | DE_ACUTE |
° | DE_DEGREE / DE_DEG |
§ | DE_SECTION / DE_SECT |
€ | DE_EURO |
£ | DE_POUND_SIGN |
¢ | DE_CENT |
¦ | DE_BROKEN_BAR |
¬ | DE_NOT |
~ | DE_TILDE |
` | DE_GRAVE |
^ | DE_CARET |
\ | DE_BACKSLASH / DE_BSLH |
| | DE_PIPE |
[ | DE_LEFT_BRACKET / DE_LBKT |
] | DE_RIGHT_BRACKET / DE_RBKT |
{ | DE_LEFT_BRACE / DE_LBRC |
} | DE_RIGHT_BRACE / DE_RBRC |
@ | DE_AT_SIGN / DE_AT |
# | DE_HASH / DE_POUND |
$ | DE_DOLLAR / DE_DLLR |
% | DE_PERCENT / DE_PRCNT |
& | DE_AMPERSAND / DE_AMPS |
* | DE_ASTERISK / DE_ASTRK / DE_STAR |
+ | DE_PLUS |
- | DE_MINUS |
_ | DE_UNDERSCORE / DE_UNDER |
= | DE_EQUAL |
/ | DE_SLASH / DE_FSLH |
! | DE_EXCLAMATION / DE_EXCL |
? | DE_QUESTION / DE_QMARK |
" | DE_DOUBLE_QUOTES / DE_DQT |
' | DE_SINGLE_QUOTE / DE_SQT / DE_APOS |
, | DE_COMMA |
. | DE_PERIOD / DE_DOT |
: | DE_COLON |
; | DE_SEMICOLON / DE_SEMI |
< | DE_LESS_THAN / DE_LT |
> | DE_GREATER_THAN / DE_GT |
( | DE_LEFT_PARENTHESIS / DE_LPAR |
) | DE_RIGHT_PARENTHESIS / DE_RPAR |
0-9 | DE_N0-DE_N9 |
a-z | DE_A-DE_Z (note: DE_Y/DE_Z are swapped to match QWERTZ) |
| Space | DE_SPACE |
So for a backslash, use &kp DE_BACKSLASH (or the shorter alias &kp DE_BSLH) in place of
&kp BSLH - on a Swiss keyboard that's AltGr + the key next to left Shift, and DE_BACKSLASH
sends exactly that physical combination.
You can't search for DE_A_UMLAUT (etc.) by name in Studio - these are C preprocessor macros
that get replaced with a raw keycode (plus an optional Shift/AltGr/Ctrl modifier) at compile
time, so by the time the firmware is running, the name is gone. Studio only ever sees "base
key + modifier," and displays the base key using its generic US name.
You can still build the identical binding by hand: in Studio, add a Key Press (&kp)
binding, pick the base key from the table below (shown by its Studio/US name), and toggle the
matching modifier next to it.
| Character | Base key in Studio | Modifier |
|---|---|---|
ä | Apostrophe / Quote | none |
ö | Semicolon / Colon | none |
ü | Left Bracket | none |
à | Apostrophe / Quote | Shift |
è | Left Bracket | Shift |
é | Semicolon / Colon | Shift |
ç | 4 | Shift |
¨ (dead key) | Right Bracket | none |
´ (dead key) | Minus | AltGr |
° | 4 | AltGr |
§ | Grave/Tilde (`) | none |
€ | E | AltGr |
£ | Backslash/Pipe | Shift |
¢ | 8 | AltGr |
¦ | 1 | AltGr |
¬ | 6 | AltGr |
~ | Equal/Plus | AltGr |
` | Equal/Plus | Shift |
^ | Equal/Plus | none |
\ | Non-US Backslash/Pipe | AltGr |
| | 7 | AltGr |
[ | Left Bracket | AltGr |
] | Right Bracket | AltGr |
{ | Apostrophe / Quote | AltGr |
} | Backslash/Pipe | AltGr |
@ | 2 | AltGr |
# | 3 | AltGr |
$ | Backslash/Pipe | none |
% | 5 | Shift |
& | 6 | Shift |
* | 3 | Shift |
+ | 1 | Shift |
- | Slash | none |
_ | Slash | Shift |
= | 0 | Shift |
/ | 7 | Shift |
! | Right Bracket | Shift |
? | Minus | Shift |
" | 2 | Shift |
' | Minus | none |
, | Comma | none |
. | Period | none |
: | Period | Shift |
; | Comma | Shift |
< | Non-US Backslash/Pipe | none |
> | Non-US Backslash/Pipe | Shift |
( | 8 | Shift |
) | 9 | Shift |
y | physical key Z | none |
z | physical key Y | none |
Letters other than y/z and digits 0-9 map 1:1 to the same-named US key, no modifier.
Every push builds both halves' firmware via GitHub Actions. Open the latest
run under the Actions tab, download the firmware artifact, and unzip it -
you'll get one .uf2 file per shield (stealth_left-nice_nano__zmk-zmk.uf2
and stealth_right-nice_nano__zmk-zmk.uf2).
To flash a half: double-tap its reset button to put it into bootloader mode
(it shows up as a USB drive named NICENANO), then drag the matching
.uf2 file onto that drive. It flashes and reboots automatically.
The left/central half is built with ZMK Studio support, so you can remap keys without rebuilding or reflashing firmware:
Changes made in Studio live only on the physical keyboard, not in this repo.
If you want a change to stick around permanently (e.g. survive a factory
reset, or apply after reflashing from a fresh build), port it back into
boards/shields/stealth/stealth.keymap by hand.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | PG1350 | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +11 | |
| 27 | ComboDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +11 | |
| 10 | ceoloide:mounting_hole_plated | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10 | |
| 2 | E73:SW_TACT_ALPS_SKQGABE010 | B1, B2 | |
| 2 | E73:SPDT_C128955 | T1, T2 | |
| 2 | JST_PH_S2B-PH-K_02x2.00mm_Angled | JST1, JST2 | |
| 1 | ceoloide:mcu_nice_nano | MCU1 | |
| 1 | TRRS-PJ-320A-dual | TRRS-PJ-320A-dual | TRRS1 |
The 72 most common of 74 parts.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

Teslafly/Dead-OpenBMS-dead
A scalable, open source battery management system

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


KaeptnBalu/Arduino_Spot_Welder_V3
This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

/Revision%202.0/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed
It measures 145.2 × 116.5 mm and has 2 copper layers, 1.6 mm thick.
74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Neil-Reichlin/Stealth repository on GitHub, at the commit this page was made from: the board is PCBs/pcbs/keyboard_pcb.kicad_pcb and its schematic keyboard/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Neil-Reichlin before reusing the design.