Skip to the content
2 layers192 × 35.5 mmMosquito Swatter, the printed circuit board in 3D

Reverse Engineered pcb design of a mosquito swatter circuit built using KiCad

Size
192 × 35.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
25
Nets
19
Pads
57
Tracks, vias
84, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
27 Aug 2026
Updated
26 Sep 2026

Overview

Mosquito Swatter is an open-source printed circuit board by Nayan9ine, from the Nayan9ine/Mosquito_Swatter_PCB repository on GitHub. It is a 2-layer board of 192 × 35.5 mm with 25 parts on 19 nets, routed with 84 tracks and 0 vias.

It is built around the B40R. Its parts include 6 diodes, 5 capacitors, 4 resistors, 2 switches and 1 transistor.

Main components

1

README

README.md

Mosquito Swatter Circuit

-by Nayan Ag

Objective: Reverse Engineered pcb design of a mosquito swatter circuit built using KiCad

This is my first attempt at drawing a pcb and also using the KiCad software, so I have done the bare minimum of clearing Electrical Rules Checker and Design Rules Checker. There must be lots of routing and component placement issues but I have rounded up sharp edges and made the traces as short as possible.

PCB FRONT
Fig1:PCB Front

PCB BACK Fig2:PCB BACK


image
Fig3:Rough PCB sketch drawn directly by tracing

image
Fig4:Arranged

image
Fig5:PCB Editor

image
Fig6:PCB Front

image
Fig7:PCB Back

Parts

25
QtyValueFootprintReferences
6MountingHole_PadMountingHole:MountingHole_2.2mm_M2_DIN965_PadAC_line1, AC_neutral1, Bat-1, Bat+1, OP1, OP2
32.2nFCapacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mmC2, C3, C4
3S2JTRDiode_THT:D_5W_P12.70mm_HorizontalD5, D6, D7
21kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R3
2LEDLED_THT:LED_Rectangular_W3.0mm_H2.0mmD2, D3
10.68µFCapacitor_THT:C_Rect_L24.0mm_W7.0mm_P22.50mm_MKTC1
122nFCapacitor_THT:C_Rect_L24.0mm_W7.0mm_P22.50mm_MKTC5
1398KΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
16.2kΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1B40RDiode_THT:Diode_Bridge_Round_D9.0mmD1
1LL1587Transformer_THT:Transformer_Breve_TEZ-22x24T1
1Q_NPNPackage_TO_SOT_THT:TO-126-3_VerticalQ1
1SW_PushButton_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFSSW3
1SW_Wuerth_450301014042Button_Switch_THT:SW_Slide_SPDT_Angled_CK_OS102011MA1QSW1

Similar boards

  • 2 layers67 × 44 mmWifiDoorBell D1-mini, the printed circuit board in 3D

    WifiDoorBell D1-mini

    thorsten-l/ESP8266-WiFi-Doorbell-Gateway

    A gateway for your doorbell button ;-)

    15 parts10Apache-2.0
  • 2 layers78.7 × 58.4 mmDimmerESP32, the printed circuit board in 3D

    DimmerESP32

    martinhofigueiredo/SE

    Sistemas Embarcados

    12 parts3
  • 2 layers87.4 × 82 mmStaccato, the printed circuit board in 3D

    Staccato

    DavidBojanovic08/Staccato-controller-SSTC

    Schematic and PCB

    30 parts
  • 4 layers98.5 × 82 mmStaccato, the printed circuit board in 3D

    Staccato

    DavidBojanovic08/Staccato-controller-VTTC

    Schematic and PCB

    27 parts
  • 4 layers250 × 130 mmSteuerschaltung Gleis, the printed circuit board in 3D

    Steuerschaltung Gleis

    nicolafehr/Umschaltplatine_Mobacom

    PCB um die Steuerung einer Testanlage mit verschiedenen Zentralen zu ermöglichen. Zudem können verschiedene Gleisabschnitte angesteuert werden können.

    209 parts
  • 2 layers144.8 × 120.6 mm3phaseDiverter, the printed circuit board in 3D

    3phaseDiverter

    FredM67/PVRouter-KiCad

    Fichiers de conception KiCad pour le Mk2 PV Router — un système open-source de routage solaire photovoltaïque universel (monophasé, triphasé avec ou sans neutre, biphasé).

    122 partsCC-BY-SA-4.0

Questions

How big is the Mosquito Swatter PCB?

It measures 192 × 35.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Mosquito Swatter use?

25 parts, built around the B40R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mosquito Swatter KiCad files?

From the Nayan9ine/Mosquito_Swatter_PCB repository on GitHub, at the commit this page was made from: the board is Mosquito Swatter.kicad_pcb and its schematic Mosquito Swatter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mosquito Swatter design in my own project?

Its repository states no licence, so its author keeps all rights: ask Nayan9ine before reusing the design.