2 layers
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!
12 parts14kMIT
2 layers41 × 57.5 mm
ESPlay32
NZX37/ESPlay321A small game console i made WAY BACK(when i did my first CAD case!!) on a perfboard with a small OLED and buttons hoping to upgrade it to a joystick and TFT, as well as use a PCB, buzzer and make use of the esp32's capabilities.
- Size
- 41 × 57.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 29
- Pads
- 72
- Tracks, vias
- 56, 0
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Oct 2026
- Updated
- 19 Oct 2026
Overview
ESPlay32 is an open-source printed circuit board by NZX37, from the NZX37/ESPlay32 repository on GitHub. It is a 2-layer board of 41 × 57.5 mm with 12 parts on 29 nets, routed with 56 tracks and 0 vias.
Its parts include 3 connectors, 2 ICs, 1 resistor, 1 diode and 1 switch. It belongs with the keyboards and input and retro computing and games boards and the ESP32 and RISC-V boards of this library.
README
README.mdESPlay32
Introduction
What it is:
A small game console powered by seeed studio xiao esp32 c3, using an accelerometer(which offers a lot of interesting ideas), a tft display and joystick module, which features built in buzzer, battery slots and power switch and LED.
How to use:
Using the pinouts in the schematic, you can upload code easily via arduino IDE. A few sample games will be made available soon.
The BOM provides links to the screen, joystick and accelerometer.
Why make?
This started as a small game console i made WAY BACK(when i did my first CAD case!!) on a perfboard with a small OLED and buttons. I was hoping to upgrade it to a joystick and TFT, add an acceleromter(for cool mechanics), as well as use a PCB, buzzer and make use of the esp32's capabilities.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H4 |
| 1 | 300R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Joystick | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | OC09600 | OC09600:MODULE_OC09600 | U2 |
| 1 | SW_SPST | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | SW3 |
| 1 | TFT_SCREEN | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | XIAO-ESP32-C3-SMD | Seeed_Studio_XIAO_Series:XIAO-ESP32-C3-DIP-SMD | U1 |
Similar boards
- 2 layers66.9 × 74.5 mm
- 2 layers40 × 15 mm
Sensors
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
12 parts3kApache-2.0 - 2 layers42.7 × 56.5 mm
- 2 layers26 × 16.9 mm
- 2 layers49 × 25 mm
5v boost regulator
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
12 parts915 - 2 layers28.3 × 10.3 mm
Tap Photosensor PCB
VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:
12 parts716GPL-3.0 - 2 layers25.4 × 70.4 mm
Tpmsniffer
stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
12 parts696
Questions
How big is the ESPlay32 PCB?
It measures 41 × 57.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESPlay32 use?
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESPlay32 KiCad files?
From the NZX37/ESPlay32 repository on GitHub, at the commit this page was made from: the board is ESPlay32.kicad_pcb and its schematic ESPlay32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESPlay32 design in my own project?
Its repository states no licence, so its author keeps all rights: ask NZX37 before reusing the design.