Skip to the content
2 layers91 × 50 mmLuther, the printed circuit board in 3D
Size
91 × 50 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
52
Pads
109
Tracks, vias
161, 16
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
17 Nov 2019
Updated
16 Feb 2020

Overview

Luther is an open-source printed circuit board by NUSTARS, from the NUSTARS/2020-NSL-RoverBoard repository on GitHub. It is a 2-layer board of 91 × 50 mm with 21 parts on 52 nets, routed with 161 tracks and 16 vias.

Its parts include 5 ICs, 5 connectors, 2 transistors, 1 resistor and 1 diode. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.

README

README.md

2020-NSL-RoverBoard

Parts

21
QtyValueFootprintReferences
3MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3
2GSDPackage_TO_SOT_SMD:SOT-23_HandsolderingQ1, Q2
2drv8838_breakoutNUSTARS Libs:drv8838_breakoutU3, U5
1330Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolderR1
1AntennaNUSTARS Libs:AntennaJ7
1BATNUSTARS Libs:DEANSJ1
1BUCKNUSTARS Libs:D24V50F5U6
1Conn_01x04Connector_JST:JST_PH_B4B-PH-K_1x04_P2.00mm_VerticalJ2
1DRV_MOTOR0Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ5
1DRV_MOTOR1Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_VerticalJ6
1LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1
1RFM95W_LoRa_RadioNUSTARS Libs:RFM95WU2
1SERVO_CLOCKConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalCLOCK1
1SERVO_LEVERConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalLEVER1
1SERVO_WIREConnector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_VerticalWIRE1
1SW_SPSTNUSTARS Libs:GF-123-0054SW1
1Teensy4.0NUSTARS Libs:Teensy40U1

More from NUSTARS/2020-NSL-RoverBoard

1
  • 2 layers52 × 40 mmOrientation, the printed circuit board in 3D

    Orientation

    NUSTARS/2020-NSL-RoverBoard

    12 parts

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Luther PCB?

It measures 91 × 50 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Luther use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Luther KiCad files?

From the NUSTARS/2020-NSL-RoverBoard repository on GitHub, at the commit this page was made from: the board is luther.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Luther design in my own project?

Its repository states no licence, so its author keeps all rights: ask NUSTARS before reusing the design.