
Ecvt main board v3
NU-Baja-SAE/hardware
Hardware: KiCad schematics/PCBs, wiring harness, BOM tooling

Hardware: KiCad schematics/PCBs, wiring harness, BOM tooling
DAQ Back Board is an open-source printed circuit board by NU-Baja-SAE, from the NU-Baja-SAE/hardware repository on GitHub. It is a 4-layer board of 102.2 × 90 mm with 59 parts on 57 nets, routed with 345 tracks and 27 vias.
It is built around the TJA1051T/3/1, TSR 1-2450 and DM3CS-SF, with the ACT45B-101-2P-TL003, BMI088 and TPD2EUSB30DRT among its other parts. Its parts include 14 connectors, 13 diodes, 9 capacitors, 9 resistors and 5 ICs.
KiCad project for the HUD node board. Add .kicad_pro/.kicad_sch/.kicad_pcb files here, with generated fab outputs under fab-outputs/ (gitignored).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | D_TVS | Diode_SMD:D_SOD-323_HandSoldering | D3, D4, D5, D6, D8, D9, D10, D11, D12, D13, D14 |
| 8 | 917781-1 | baja_footprint_library:TE-Connectivity_917781 | J3, J4, J5, J7, J8, J9, J13, J15 |
| 5 | .1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C6, C8, C9 |
| 4 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5 |
| 2 | 220p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C5 |
| 2 | 60 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 917780-1 | baja_footprint_library:TE-Connectivity_ 917780 | J2, J6 |
| 2 | Conn_01x19_Socket | Connector_PinSocket_2.54mm:PinSocket_1x19_P2.54mm_Vertical | J11, J12 |
| 2 | SW_SPST | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin | SW1, SW2 |
| 1 | .1uf | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 1 | 0603 Fuse | Fuse:Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 1 | 5V | Diode_SMD:D_SMA | D1 |
| 1 | 917783-1 | baja_footprint_library:Connector_1x5 | J10 |
| 1 | ACT45B-101-2P-TL003 | baja_footprint_library:ACT45B-101-2P-TL003 | U3 |
| 1 | BMI088 | Package_LGA:Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumbering | U4 |
| 1 | DM3CS-SF | baja_footprint_library:SD_Card | J1 |
| 1 | LOGO | baja_footprint_library:baja_logo_footprint | G*** |
| 1 | Q_PMOS_DGS | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | SMAJ26A | Diode_SMD:D_SMA | D2 |
| 1 | TJA1051T-3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | TPD2EUSB30 | Package_TO_SOT_SMD:Texas_DRT-3 | U5 |
| 1 | TSR_1-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR-1_THT | U1 |

NU-Baja-SAE/hardware
Hardware: KiCad schematics/PCBs, wiring harness, BOM tooling





higg22-git/Project-Atlas
Four-layer STM32G474 control board that replaced the legacy electronics on BYU Formula SAE Electric's race car. KiCad schematic, layout and manufacturing package.





ale-giustina/CAN-serializer
A 3 interface FDCAN serializer based on a STM32G473CCTx
It measures 102.2 × 90 mm and has 4 copper layers, 1.6 mm thick.
59 parts, built around the TJA1051T/3/1, TSR 1-2450, DM3CS-SF and ACT45B-101-2P-TL003. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NU-Baja-SAE/hardware repository on GitHub, at the commit this page was made from: the board is boards/DAQ_Back_Board/DAQ_Back_Board.kicad_pcb and its schematic boards/DAQ_Back_Board/CAN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NU-Baja-SAE before reusing the design.