

BMS Slave V1(ADBMS1818)
kicad files
- Size
- 200 × 50 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 326
- Nets
- 238
- Pads
- 928
- Tracks, vias
- 1,715, 205
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Aug 2023
- Updated
- 4 May 2026
Overview
BMS Slave V1(ADBMS1818) is an open-source printed circuit board by NTURacingTeam, from the NTURacingTeam/nturt_kicad repository on GitHub. It is a 4-layer board of 200 × 50 mm with 326 parts on 238 nets, routed with 1,715 tracks and 205 vias.
It is built around the LT8631IFE#PBF, NX2301P,215-VB and ADG728BRUZ, with the AD8628ARTZ-R2, ADBMS1818ASWAZ-R7 and RJ45 among its other parts. Its parts include 157 resistors, 86 capacitors, 23 ICs, 16 diodes and 16 fuses. It belongs with the power boards of this library.
Main components
6LT8631IFE#PBF
TSSOP-20-EP-40℃~+125℃@(TJ) 1 16uA 1A 1MHz 3V~100V 800mV~60V Adjustable Buck Buck Built-in Yes TSSOP-20-EP DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersNX2301P,215-VB
SOT-23SOT-23 MOSFETs ROHSVBsemi ElecMOSFETsADG728BRUZ
TSSOP-16-40℃~+85℃ 140ns 2.5Ω 2.7V~5.5V 65MHz 8:1 95ns 96pF TSSOP-16 Analog Switches, Multiplexers ROHSAnalog DevicesAnalog Switches, MultiplexersAD8628ARTZ-R2
SOT-23-5-2.5V~-1.35V、1.35V~2.5V -40℃~+125℃ 1 140dB 1V/us 1mA 1uV 2.5MHz 2.7V~5V 22nV/√Hz@1kHz 2nV/℃ 30mA 30pA 50pA Rail-to-Rail Input, Rail-to-Rail Output Zero drift / auto-zero、Reverse-phase input protection SOT-23-5 Precision Op Amps ROHSAnalog DevicesPrecision Op AmpsADBMS1818ASWAZ-R7
LQFP-64-EP(10x10)-40℃~+85℃ 16V~90V 18 200mA 6uA I2C、SPI Monitoring IC Support LQFP-64-EP(10x10) Battery Management ROHSAnalog DevicesBattery ManagementRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
README
README.mdNTU Racing Team KiCad Files
Guide for configuring path variables and libraries
[!NOTE] Before you start, please include the appropriate libraries and path variables to ensure components and their resources can be loaded correctly!
1. Configuring path variable
2. Configuring libraries
[!NOTE] Configure symbol libraries and footprint libraries according to the README files located in each generation's directory. Images shown here are only for demonstration purposes only.
Adding 3D models
- Copy the .step/.wrl files to
EPx/Libraries/3d_modelsfolder - In the footprint editor (press Ctrl+E on a footprint in the PCB editor), open footprint properties, navigate to the 3D Models tab, and select the 3D model file with the folder icon to the left of the Show checkbox.
- The path should be replaced with
${NTURT_KICAD_ROOT}/EPx/Libraries/3d_models/..., if not, then you will need to set up the path variable. - Adjust the position of the model.
[!NOTE] For a part that a 3D model would be helpful, if it is a part that came with KiCad, then consider "Save as" in the footprint editor to the project library, then edit the 3D model.
If it is already from a project library, remember to select "Open in library XXX" if it says "Editing XXX from board." on top. After you're done, right click the footprint in the PCB editor and select Update Footprint, check Update/reset 3D models.
Parts
326| Qty | Value | Footprint | References |
|---|---|---|---|
| 66 | 10n | Capacitor_SMD:C_0603_1608Metric | C101, C102, C103, C104, C105, C106, C107, C108, C109, C110, C111, C112, C113, C114, C115, C118 +50 |
| 54 | 100 | Resistor_SMD:R_0603_1608Metric | R161, R162, R163, R164, R165, R166, R167, R168, R169, R170, R171, R172, R173, R174, R175, R176 +38 |
| 34 | 10k | Resistor_SMD:R_0603_1608Metric | R183, R184, R185, R186, R187, R188, R189, R190, R191, R192, R193, R194, R195, R196, R197, R198 +18 |
| 30 | 130 | Resistor_SMD:R_2512_6332Metric | R116, R117, R118, R119, R120, R121, R122, R123, R124, R125, R126, R127, R128, R129, R130, R131 +14 |
| 16 | 0466.250NR | Fuse:Fuse_1206_3216Metric | F101, F102, F103, F104, F105, F106, F107, F108, F109, F110, F111, F112, F113, F114, F115, F116 |
| 16 | RED | LED_SMD:LED_0603_1608Metric | D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115, D116 |
| 15 | 3.3k | Resistor_SMD:R_0603_1608Metric | R146, R147, R148, R149, R150, R151, R152, R153, R154, R155, R156, R157, R158, R159, R160 |
| 15 | 510 | Resistor_SMD:R_0603_1608Metric | R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114, R115 |
| 15 | MMSZ4692T1G | Diode_SMD:D_SOD-123 | Z101, Z102, Z103, Z104, Z105, Z106, Z107, Z108, Z109, Z110, Z111, Z112, Z113, Z114, Z115 |
| 15 | NX2301P,215 | Package_TO_SOT_SMD:SOT-23 | IC101, IC102, IC103, IC104, IC105, IC106, IC107, IC108, IC109, IC110, IC111, IC112, IC113, IC114, IC115 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C116, C117, C133, C134, C135, C136 |
| 4 | 1uF | Capacitor_SMD:C_0805_2012Metric | C175, C176, C177, C178 |
| 4 | ADG728BRUZ | SamacSys_Parts:SOP65P640X120-16N | IC116, IC117, IC118, IC119 |
| 4 | Conn_01x16 | Connector_JST:JST_PH_B16B-PH-K_1x16_P2.00mm_Vertical | J104, J105, J106, J107 |
| 4 | MountingHole | MountingHole:MountingHole_4.3mm_M4_DIN965 | H101, H102, H103, H104 |
| 3 | 100p | Capacitor_SMD:C_0603_1608Metric | C139, C140, C202 |
| 3 | 1k | Resistor_SMD:R_0603_1608Metric | R182, R252, R253 |
| 2 | 10nF | Capacitor_SMD:C_0603_1608Metric | C179, C180 |
| 2 | 120R | Resistor_SMD:R_0603_1608Metric | R215, R216 |
| 2 | AD8628ARTZ-R2 | SamacSys_Parts:SOT95P280X145-5N | IC121, IC122 |
| 2 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J101, J102 |
| 1 | 0.1u | Capacitor_SMD:C_0603_1608Metric | C203 |
| 1 | 191k/1% | Resistor_SMD:R_0603_1608Metric | R257 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R251 |
| 1 | 1M/1% | Resistor_SMD:R_0603_1608Metric | R256 |
| 1 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C205 |
| 1 | 2.2u | Capacitor_SMD:C_2220_5650Metric | C201 |
| 1 | 22u | Capacitor_SMD:C_1206_3216Metric | C206 |
| 1 | 22u/2A | Inductor_SMD:L_Bourns-SRN8040_8x8.15mm | L201 |
| 1 | 25.5k | Resistor_SMD:R_0603_1608Metric | R255 |
| 1 | 4.7p | Capacitor_SMD:C_0603_1608Metric | C204 |
| 1 | ADBMS1818ASWAZ-R7 | Package_QFP:LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm | IC120 |
| 1 | Conn_01x16 | Connector_JST:JST_XH_B16B-XH-A_1x16_P2.50mm_Vertical | J103 |
| 1 | LT8631IFE#PBF | Samacsys:SOP65P640X120-21N | IC201 |
| 1 | Wuerth_749013011A | Transformer_SMD:Transformer_Ethernet_Wuerth_749013011A | TR101 |
More from NTURacingTeam/nturt_kicad
12- 4 layers100 × 100 mm

- 4 layers116 × 148 mm

- 4 layers100 × 92 mm

- 4 layers200 × 50 mm

- 4 layers100 × 92 mm

- 2 layers148.9 × 79.5 mm

- 2 layers203.5 × 154 mm

- 4 layers123 × 86.5 mm

- 4 layers100 × 82 mm

- 4 layers157.9 × 158.1 mm

- 4 layers123 × 75.1 mm

- 2 layers70.8 × 90.7 mm

Similar boards
- 4 layers101.6 × 141.7 mm

- 4 layers38 × 35 mm

D1(Motherboard)
BenjaminJAnderson/CUBE
CUBE is a miniature, six-faced OLED display cube built from a stack of custom interconnected PCBs. The current design combines an ESP32-S2 motherboard, five further display boards, a magnet-held 3D-printed frame and…
51 partsMIT - 2 layers38.1 × 25.4 mm

- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm

Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm

- 2 layers50 × 55.4 mm

- 2 layers67.9 × 47.8 mm

Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0
Questions
How big is the BMS Slave V1(ADBMS1818) PCB?
It measures 200 × 50 mm and has 4 copper layers, 1.6 mm thick.
What parts does the BMS Slave V1(ADBMS1818) use?
326 parts, built around the LT8631IFE#PBF, NX2301P,215-VB, ADG728BRUZ and AD8628ARTZ-R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BMS Slave V1(ADBMS1818) KiCad files?
From the NTURacingTeam/nturt_kicad repository on GitHub, at the commit this page was made from: the board is EP5/Powertrain/BatteryBox/BMS_Slave_V1(ADBMS1818)/BMS_Slave_V1(ADBMS1818).kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BMS Slave V1(ADBMS1818) design in my own project?
Its repository states no licence, so its author keeps all rights: ask NTURacingTeam before reusing the design.