
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Minipops drum machine shield for Arduino Uno.
NANO Minipops is an open-source printed circuit board by NANOmodules, from the NANOmodules/NANO-Minipops repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 21 parts on 18 nets, routed with 167 tracks and 17 vias.
Its parts include 2 capacitors, 2 resistors, 2 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Arduino project based in Minipops design by Jan Ostman (DSP Synthesizers)
The hardware consists in an Arduino Uno including it shield with 9 slide switches, 2 rotary potentiometers and 1 LED. Software in the CODE folder contains all the necessary to convert your Arduino Uno in a Minipops drum box.
Click on the image to watch the presentation video!
Link of the video: https://www.youtube.com/watch?v=v7ahzl_3tDo&t=2s
Jan project info: https://janostman.wordpress.com/the-o2-source-code/
This Github contains the information needed to build and flash an Arduino Minipops shield.
Contents are divided in the following categories:
Include the component list, with it’s values and additional information.Arduino sketch with the code needed to run the device.KiCad files for the project, including schematic, PCB and the project itself.PCB fabrication files.Electronic circuit design.This project is licensed under CC BY-NC-SA 4.0
NANO Modules
Instagram: @NANOmodules
Facebook: /NANOmodules
València - SPAIN 2018
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | _ | NANO-FOOTPRINTS:SlideSwitch | PLAY/STOP, SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 2 | 1k | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | R1, R2 |
| 2 | POT | Potentiometers:Potentiometer_Alps_RK09K_Horizontal | RV1, RV2 |
| 1 | 100nF | Resistors_Universal:Resistor_SMD+THTuniversal_0805to1206_RM10_HandSoldering | C2 |
| 1 | 10uF | Capacitors_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | Arduino_Uno_Shield | Arduino:Arduino_Uno_Shield | XA1 |
| 1 | Conn_01x02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | Jack | Nano:Jack-CUI | J1 |
| 1 | LED | LEDs:LED_D3.0mm | D1 |
| 1 | LOGO | NANO-LOGOS:NANO-LogoSilk15mm | G*** |
| 1 | LOGO | NANO-LOGOS:NANO-LogoMask15mm | G*** |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the NANOmodules/NANO-Minipops repository on GitHub, at the commit this page was made from: the board is DESIGN FILES/NANO-Minipops.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask NANOmodules before reusing the design.