Skip to the content
2 layersFirst PCB, the printed circuit board in 3D

This is simple pcb just for Leds where you can connect it to outup terminals and check which output terminal is not working

Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
7
Pads
16
Tracks, vias
23, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
21 Oct 2026
Updated
21 Oct 2026

Overview

First PCB is an open-source printed circuit board by MuhammadAbuzarCUI, from the MuhammadAbuzarCUI/PCB-for-3-LEDs-output-verification repository on GitHub. It is a 2-layer board with 7 parts on 7 nets, routed with 23 tracks and 0 vias.

Its parts include 3 resistors, 3 diodes and 1 connector.

README

README.md

PCB-for-3-LEDs-output-verification

This is simple pcb just for Leds where you can connect it to outup terminals and check which output terminal is not working

Parts

7
QtyValueFootprintReferences
3LEDLED_THT:LED_D3.0mmD1, D2, D3
3RResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2, R3
1Conn_01x04_PinConnector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_VerticalJ1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

What parts does the First PCB use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the First PCB KiCad files?

From the MuhammadAbuzarCUI/PCB-for-3-LEDs-output-verification repository on GitHub, at the commit this page was made from: the board is output verification or tester/first PCB.kicad_pcb and its schematic output verification or tester/_restore_backup_2026-09-28T15-49-33-289/first PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the First PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask MuhammadAbuzarCUI before reusing the design.