2 layers
IS250 Interface Board SMT Edition
MrArgon39/SimDrivingCockpit
All the code and other assorted stuff for this project
57 parts
2 layers176.3 × 106.7 mm
IS250 Interface Board
MrArgon39/SimDrivingCockpitAll the code and other assorted stuff for this project
- Size
- 176.3 × 106.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 62
- Nets
- 156
- Pads
- 295
- Tracks, vias
- 392, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Sep 2022
- Updated
- 28 Jul 2024
Overview
IS250 Interface Board is an open-source printed circuit board by MrArgon39, from the MrArgon39/SimDrivingCockpit repository on GitHub. It is a 2-layer board of 176.3 × 106.7 mm with 62 parts on 156 nets, routed with 392 tracks and 0 vias.
It is built around the AD8400ARZ1, PN2222A and PN2907A, with the XT60-M among its other parts. Its parts include 21 resistors, 11 transistors, 8 connectors, 6 switches and 2 ICs. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
4
AD8400ARZ1
SOIC-8-40℃~+125℃ 1 1kΩ 2.7V~5.5V 256 5MHz 700ppm/℃ Linear SPI Soft reset ±33% SOIC-8 Digital Potentiometers ROHSAnalog DevicesDigital Potentiometers
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)PN2907A
TO-92-3Bipolar (BJT)NTE ElectronicsXT60-M
THrough holeTHroughhole New Arrivals ROHSChangzhou Amass ElecUncategorised
README
README.mdSimDrivingCockpit
All the code and other assorted stuff for this project
Folder Explanation
- Code - All of the code that I have made and will make.
- Reference Images - Mainly used for the steering wheel design.
- Make Physical Things - Where laser files and 3D? printing files will go. Same with PCBs.
- Service Documentation - All of the docs about what wire I need to put where to get things to work.
Parts
62| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q3, Q4, Q5, Q6, Q7, Q8, Q10 |
| 7 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R12, R13, R14, R16, R17 |
| 6 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5, R8, R9, R10, R21 |
| 6 | TestPoint_Pad_D1.0mm | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 5 | SW_MEC_5G | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW2, SW3, SW4, SW5, SW6 |
| 4 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7, J8 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R6, R7 |
| 3 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R15, R18 |
| 3 | PN2907A | Package_TO_SOT_THT:TO-92_Inline | Q2, Q9, Q11 |
| 2 | LED | LED_THT:LED_D5.0mm | D1, D2 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R19 |
| 1 | 16_Pin | IS250 Interface Board:16Pin | J2 |
| 1 | 24_Pin_Reorg | IS250 Interface Board:24Pin | J1 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R20 |
| 1 | 4017 | Package_DIP:DIP-16_W7.62mm | U2 |
| 1 | AD8400ARZ1 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U1 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J3 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Bourns_3386P_Vertical | RV1 |
| 1 | SW_SPST | IS250 Interface Board:JaycarSlideSwitch | SW1 |
| 1 | XT60-M | XT60:AMASS_XT60-M | J4 |
The 58 most common of 62 parts.
More from MrArgon39/SimDrivingCockpit
1Similar boards
- 4 layers51.5 × 32 mm
Overdrive
kyledenobel/RGA_Boards
PCB Board design and development for RGA (Recording Guitar Amplifier)
44 parts - 2 layers
Indicator driver
virtualagc/agc_hardware
Schematics and board layouts for an Apollo Guidance Computer replica
176 parts118MIT - 2 layers333.4 × 149.9 mm
- 2 layers333.4 × 149.9 mm
- 2 layers44.1 × 10 mm
- 4 layers154 × 159 mm
- 2 layers330.2 × 106.7 mm
- 2 layers207 × 122 mm
Questions
How big is the IS250 Interface Board PCB?
It measures 176.3 × 106.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the IS250 Interface Board use?
62 parts, built around the AD8400ARZ1, PN2222A, PN2907A and XT60-M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IS250 Interface Board KiCad files?
From the MrArgon39/SimDrivingCockpit repository on GitHub, at the commit this page was made from: the board is Make Physical Things/IS250 Interface Board/IS250 Interface Board.kicad_pcb and its schematic Make Physical Things/IS200 Interface Board/IS200 Interface Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IS250 Interface Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask MrArgon39 before reusing the design.