Skip to the content
4 layers159.5 × 100 mmRtd readout, the printed circuit board in 3D

Multi-channel 4-wire RTD readout for a LabJack T7 Pro.

Size
159.5 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
47
Nets
31
Pads
122
Tracks, vias
241, 53
Pours
4
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Jun 2026
Updated
31 Jul 2026

Overview

Rtd readout is an open-source printed circuit board by Moore-Lab, from the Moore-Lab/excitation-current-source-v2 repository on GitHub. It is a 4-layer board of 159.5 × 100 mm with 47 parts on 31 nets, routed with 241 tracks and 53 vias.

Its parts include 14 resistors, 8 capacitors, 7 connectors, 4 diodes and 2 ICs.

README

README.md

RTD Readout Board

Multi-channel 4-wire RTD readout for a LabJack T7 Pro.

Each RTD gets its own constant-current loop: a current-regulator diode (CRD, ~220 µA) drives a precision reference resistor R_ref in series with the RTD. The RTD voltage V_RTD is read on the T7's existing differential pairs; the current-sense voltage V_ref is digitized on-board by I²C ADS1115 ADCs on the T7's digital lines. Each RTD is then computed ratiometrically as R_RTD = C · (V_RTD / V_ref), where the per-channel constant C is found by one-time cross-calibration against a known resistor. This makes the result independent of the CRD's accuracy and R_ref's absolute value, and fits within the T7's already-committed 7 analog pairs by moving V_ref onto the I²C bus.

This build (locked, docs/board_spec.md §Resolved inputs): Pt100 RTDs, T7 range ±0.1 V; 3 channels → 3 CRD/R_ref unit cells, 2 ADS1115 (ADDR 0x48/0x49; 4 differential V_ref reads, 1 spare), 3 RTD 4-wire connectors. The result is ratiometric across two ADCs (T7 + ADS1115), so the dominant design concern is protecting the precision-analog path (sense + V_ref) and keeping the I²C/digital side off it.

Where to start

  • Read this first: docs/USER_MANUAL.md — one place to understand the board, see what was built, and check the verification evidence (ERC/DRC/SPICE) before fab.
  • Design: docs/board_spec.md (electrical source of truth).
  • Working with Claude Code: CLAUDE.md → docs/SESSION_KICKOFF.md.
  • Running multiple sessions in parallel: docs/PARALLEL_PLAN.md + docs/tasks/.
  • Process: docs/DIRECTORY_MANAGEMENT.md, docs/BOARD_DEV_CHECKLIST.md, docs/TESTING_PLAN.md.

Toolchain

  • KiCad 10.0.3 — pinned. The gate scripts auto-discover kicad-cli on PATH, else at the standard Windows install (C:\Program Files\KiCad\<ver>\bin\kicad-cli.exe); override with KICAD_CLI=/path/to/kicad-cli. A KiCad major bump can rewrite the .kicad_* formats — bump the pin in scripts/lib.sh deliberately and note it in the log.
  • ngspice — SPICE engine for Track B's harness (sim/).
  • Python + LabJack LJM — acquisition library in host/ (Track C). Not used by the gate scripts, which are POSIX sh (run under Git Bash on Windows or natively on Linux/macOS).

Validation gates

The cheap, machine-checkable gates run from one entry point. It degrades gracefully: with no KiCad design files yet (before the schematic/PCB land) it reports "nothing to check" and exits 0, so every track and the integration step run it identically.

sh
sh scripts/run_gates            # ERC + DRC -> reports/{erc,drc}/, nonzero on any error
sh scripts/run_gates --tag s007 # stamp reports as erc_s007.json / drc_s007.json
ScriptDoesOutput
scripts/run_gatesERC + DRC; the gate every session runsreports/{erc,drc}/*.json
scripts/ercERC only (canonical command)reports/erc/erc_<tag>.json
scripts/drcDRC only (refills zones; never saves the board)reports/drc/drc_<tag>.json
scripts/export_bomBOM incl. Tempco field (R_ref stability)reports/bom/bom_<tag>.csv
scripts/export_netlistSchematic netlist for the SPICE harnesssim/netlists/rtd-readout.net
scripts/fab_dropGerbers + drill + pos + STEP + BOMfab/** (gitignored)
scripts/lib.shShared helpers (sourced, not run)—

reports/** is generated but committed (cheap, diffs well, gives the log something to cite); regenerate it from these scripts, never hand-edit. Default tag is latest (overwrites for clean diffs); pass --tag sNNN to keep a session-stamped copy.

Optional: enforce gates on commit

sh
sh scripts/install_hooks   # installs a pre-commit hook that runs scripts/run_gates

Opt-in (not installed automatically, so it never surprises a parallel-track worktree). It's a no-op until the schematic/PCB exist. Remove it with rm "$(git rev-parse --git-path hooks)/pre-commit".

Cutting a fab drop

Only at a reviewed, DRC-clean, tagged rev — fab/ is gitignored; capture the drop with a git tag, never leave it in-tree (docs/DIRECTORY_MANAGEMENT.md).

sh
sh scripts/run_gates && git tag rev-A     # gate, then tag the reviewed state
sh scripts/fab_drop                       # gerbers/drill/pos/step/bom -> fab/
git tag fab-rev-A                          # capture the manufacturing drop

Parts

47
QtyValueFootprintReferences
10TestPointrtd-readout:TestPoint_Pad_D1.5mmTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10
81kR_0805_2012MetricR7, R8, R9, R10, R11, R12, R13, R14
40.1uFrtd-readout:C_1206_3216MetricC5, C6, C7, C8
4CRD ~100uArtd-readout:D_SEMITEC_S-101TD1, D2, D3, D4
4Conn_RTD_4Wrtd-readout:TerminalBlock_Phoenix_PT-1,5-5-3.5-H_1x05_P3.50mm_HorizontalJ1, J2, J3, J7
31krtd-readout:R_1206_3216MetricR1, R2, R3
20.1uFrtd-readout:C_0805_2012MetricC1, C2
210uFrtd-readout:C_0805_2012MetricC3, C4
24.7krtd-readout:R_0805_2012MetricR4, R5
2TestPointTestPoint_Pad_D1.5mmTP11, TP12
11kR_1206_3216MetricR6
1ADS1115IDGS (0x48)rtd-readout:MSOP-10_3x3mm_P0.5mmU1
1ADS1115IDGS (0x49)rtd-readout:MSOP-10_3x3mm_P0.5mmU2
1Conn_Powerrtd-readout:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ6
1Conn_T7_I2Crtd-readout:Molex_PicoBlade_53048-0410_1x04_P1.25mm_HorizontalJ5
1Conn_T7_RJ45rtd-readout:RJ45_Amphenol_RJHSE5380J4

Similar boards

  • 4 layers17.4 × 43.2 mmAmulet encoder, the printed circuit board in 3D

    Amulet encoder

    EPFLXplore/XRE_LeggedRobot_HW

    PCB designs for Xplore Research's robot dog project

    47 parts348Apache-2.0
  • 4 layers41 × 20 mmPmod prbs slow, the printed circuit board in 3D

    Pmod prbs slow

    azonenberg/starshipraider

    Open hardware test equipment

    47 parts193BSD-3-Clause
  • 4 layers67.5 × 9.2 mmRef mic, the printed circuit board in 3D

    Ref mic

    loudifier/OpenRefMic

    open hardware design for a high-performance low-cost measurement microphone

    47 parts169MIT
  • 4 layers67 × 31.3 mmFlipper subg, the printed circuit board in 3D

    Flipper subg

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    47 parts133
  • 4 layers149.9 × 110 mmSch, the printed circuit board in 3D

    Sch

    DownUnderCTF/Challenges_2024_Public

    Files + Solutions for DownUnderCTF 2024 Challenges

    47 parts116
  • 4 layers61.3 × 66.3 mmTerasicDECACape, the printed circuit board in 3D

    TerasicDECACape

    MiSTeX-devel/MiSTeX-hardware

    Hardware for MiSTeX

    47 parts73
  • 4 layers100 × 65 mmBefore split, the printed circuit board in 3D

    Before split

    rjwalters/kicad-tools

    Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

    47 parts73MIT
  • 4 layers17.8 × 51.6 mmBonsai C, the printed circuit board in 3D

    Bonsai C

    customMK/Bonsai-C

    An open-source ARM-based microcontroller board

    47 parts71

Questions

How big is the Rtd readout PCB?

It measures 159.5 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Rtd readout use?

47 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rtd readout KiCad files?

From the Moore-Lab/excitation-current-source-v2 repository on GitHub, at the commit this page was made from: the board is hardware/rtd-readout.kicad_pcb and its schematic hardware/rtd-readout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rtd readout design in my own project?

Its repository states no licence, so its author keeps all rights: ask Moore-Lab before reusing the design.