4 layers81 × 15 mm
2 layers78.2 × 100 mm
NRF dev
Monash-BoSL/BoSLcamHardware repository for the BoSLcam, IoT camera.
- Size
- 78.2 × 100 mm
- Copper layers
- 2
- Thickness
- 1 mm
- Parts
- 54
- Nets
- 113
- Pads
- 417
- Tracks, vias
- 1,175, 107
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 8 Mar 2024
- Updated
- 14 Oct 2026
Overview
NRF dev is an open-source printed circuit board by Monash-BoSL, from the Monash-BoSL/BoSLcam repository on GitHub. It is a 2-layer board of 78.2 × 100 mm with 54 parts on 113 nets, routed with 1,175 tracks and 107 vias.
It is built around the 23LCV1024-I/SN, BGA524N6 and MSQA6V1W5T2G-TP, with the FH26W-25S-0.3SHW(60) among its other parts. Its parts include 15 capacitors, 11 connectors, 8 resistors, 7 ICs and 2 switches.
Main components
4
23LCV1024-I/SN
SOIC-8-40℃~+85℃ 1Mbit 2.5V~5.5V 4uA SPI SOIC-8 SRAM ROHSMicrochip TechnologySRAMBGA524N6
SMDSMD New Arrivals ROHSInfineon TechnologiesUncategorised
MSQA6V1W5T2G-TP
SOT-353ESD And Surge Protection (TVS/ESD)TECH PUBLIC
FH26W-25S-0.3SHW(60)
SMD,P=0.6mm(交错脚)-55℃~+85℃ 0.2mm 0.6mm 1mm 25P Bottom Contact Gold Hinged Lid Phosphor bronze Surface Mount, Right Angle SMD,P=0.6mm(交错脚) FFC, FPC (Flat Flexible) Connector Assemblies ROHSHirose ElectricFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdHardware repository for the BoSLcam, IoT camera.
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100 nF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C5, C8, C11, C18, C19 |
| 6 | 10 kΩ | Resistor_SMD:R_0402_1005Metric | R2, R3, R4, R5, R6, R8 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 2 | . | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP3 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C4, C17 |
| 2 | 15 pF | Capacitor_SMD:C_0402_1005Metric | C6, C9 |
| 2 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4, J7 |
| 1 | . | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | 1 nF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 1 μF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 100 kΩ | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100 uF | Capacitor_SMD:CP_Elec_5x5.8 | C1 |
| 1 | 220 pF | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 23LCV1024-I/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | 39 Ω | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 9.1 nH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | AT-GNSS | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AT2 |
| 1 | AT-MAIN | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | AT1 |
| 1 | BGA524N6 | project:TSNP-6-2 | U5 |
| 1 | BTA | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | Conn_01x15_Male | Connector_PinHeader_2.54mm:PinHeader_1x15_P2.54mm_Vertical | J8 |
| 1 | FH26W-25S-0.3SHW(60) | FH26W-25S-0:HRS_FH26W-25S-0.3SHW(60) | J6 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | MCP1700-3302E_SOT23 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | MSQA6V1W5T2G | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U6 |
| 1 | Micro_SD_Card | project:microSD_Connector | J3 |
| 1 | NRF9160 | project:nRF9160 | U3 |
| 1 | OV7675_DBG | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | J5 |
| 1 | OV7675pcb | Connector_PinHeader_2.54mm:PinHeader_2x10_P2.54mm_Vertical | U4 |
| 1 | RST | Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 1 | SIM | project:SIMNano | J9 |
| 1 | SIP32508DT-T1-GE3 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | nRF_DBG | Connector_PinHeader_1.27mm:PinHeader_2x03_P1.27mm_Vertical | J10 |
More from Monash-BoSL/BoSLcam
2- 2 layers36 × 10 mm
Similar boards
- 4 layers36 × 46 mm
- 4 layers
Sim7070
onomondo/getting-started
Onomondo Getting Started development kit. Board design files and firmware.
96 parts7 - 2 layers
- 4 layers55 × 45 mm
STM32F469 DISEN RevJ Prep1
yakuptrkn42-create/ai_pcb_design
Öneri projesini AIESVideoSchematicReviewR1/Proposal/Project/AIESOneriP1.kicadpro ile KiCad 9'da açın. P1 ERC: 0 hata / 0 uyarı; 157 pin–net eşlemesi kontrol edildi.
53 parts - 2 layers203 × 26.6 mm
- 2 layers30 × 50 mm
- 2 layers100.1 × 40 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
54 parts766 - 2 layers100 × 120 mm
Questions
How big is the NRF dev PCB?
It measures 78.2 × 100 mm and has 2 copper layers, 1 mm thick.
What parts does the NRF dev use?
54 parts, built around the 23LCV1024-I/SN, BGA524N6, MSQA6V1W5T2G-TP and FH26W-25S-0.3SHW(60). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NRF dev KiCad files?
From the Monash-BoSL/BoSLcam repository on GitHub, at the commit this page was made from: the board is EDA/nRF_dev/nRF_dev.kicad_pcb and its schematic EDA/image_light/image_light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NRF dev design in my own project?
Its repository states no licence, so its author keeps all rights: ask Monash-BoSL before reusing the design.