Skip to the content
2 layersR503toFeather, the printed circuit board in 3D

Grow R503 to FeatherWing

Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
29
Pads
40
Tracks, vias
41, 1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 Aug 2024
Updated
16 Mar 2026

Overview

R503toFeather is an open-source printed circuit board by MimoCAD, from the MimoCAD/R503toFeather repository on GitHub, published under the MIT licence. It is a 2-layer board with 4 parts on 29 nets, routed with 41 tracks and 1 via.

Its parts include 2 resistors and 1 connector.

README

README.md

Pinout

Adafruit Feather RP2350 HSTX

Adafruit Feather RP2350 HSTX Pinout

Grow R503 Pro

GROW R503 Pro MX1.0-6P Pinout

Connections

#R503 Pro Wire ColorNamePIN #Pin NameNotes
1$${\color{red}RED \space Wire}$$Power3V3$${\color{red}3V3}$$3.3 Volts (Top Left Of Feather).
2$${\color{black}BLACK \space Wire}$$GNDGRD$${\color{black}GND}$$Ground (Right Under 3.3 Pins).
3$${\color{yellow}YELLOW \space Wire}$$TXD01$${\color{green}RX}$$TX on R503 <> RX on the Feather.
4$${\color{green}GREEN \space Wire}$$RXD00$${\color{yellow}TX}$$RX on R503 <> TX on the Feather.
5$${\color{blue}BLUE \space Wire}$$Wakeup02$${\color{BLUE}SDA}$$Finger Detection (Pulled High).
6$${\color{white}WHITE \space Wire}$$Touch3V3$${\color{red}3V3}$$3.3 Volts (Top Left Of Feather).

Parts

4
QtyValueFootprintReferences
20RResistor_SMD:R_1206_3216MetricR1, R2
1Adafruit_Feather_GenericModule:Adafruit_FeatherA1
1MX1.0 6PConnector_JST:JST_SHL_SM06B-SHLS-TF_1x06-1MP_P1.00mm_HorizontalJ1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

What parts does the R503toFeather use?

4 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the R503toFeather KiCad files?

From the MimoCAD/R503toFeather repository on GitHub, at the commit this page was made from: the board is R503toFeather.kicad_pcb and its schematic R503toFeather.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the R503toFeather design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).