

PSU Board
- Size
- 99.1 × 40.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 12
- Pads
- 45
- Tracks, vias
- 58, 16
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 29 Nov 2024
- Updated
- 18 Sep 2025
Overview
PSU Board is an open-source printed circuit board by MilosSubotic, from the MilosSubotic/OSuRV_2024 repository on GitHub, published under the MIT licence. It is a 2-layer board of 99.1 × 40.6 mm with 17 parts on 12 nets, routed with 58 tracks and 16 vias.
It is built around the L7809, L7909 and W10M. Its parts include 4 capacitors, 3 fuses, 2 ICs, 2 connectors and 1 diode. It belongs with the power boards of this library.
Main components
3L7809
TO-220-20℃~+125℃@(Tj) 1 1.5A 2V@(1.0A) 35V 58uV 5mA 66dB@(120Hz) 9V Fixed Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSPUOLOPVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7909
TO-263-2TO-263-2 New Arrivals ROHSSTMicroelectronicsUncategorisedW10M
DIP-4-55℃~+150℃ 1.5A 1V@1.5A 1kV 50A 5uA Single-Phase Rectifier DIP-4 Bridge Rectifiers ROHSLGEBridge Rectifiers
README
README.mdOSuRV_2024
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 100n | For_Rasterboard:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4 |
| 2 | F0.2A | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal | F2, F3 |
| 1 | 0.1A | Fuse:Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal | F1 |
| 1 | 10000u 16V | Capacitor_THT:CP_Radial_D16.0mm_P7.50mm | C1 |
| 1 | 1000u 16V | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 230V 3.2VA - 2x 12V 1.6VA | For_Rasterboard:Transformer-3VA_2xSec | T1 |
| 1 | L7809 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | L7909 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | NS25-W3P male | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | W10M | Diode_THT:Diode_Bridge_Round_D9.8mm | D1 |
More from MilosSubotic/OSuRV_2024
2- 2 layers58.4 × 50.8 mm

- 2 layers73.7 × 66 mm

Similar boards
- 2 layers100 × 121 mm

- 2 layers100 × 60 mm

Hotplate soldering
Arnaud-Apu-Fanovard/Hotplate-soldering
Hotplate soldering for PCB SMD componants for diyPCB
46 parts - 2 layers86.4 × 66 mm

- 2 layers231.1 × 106.7 mm

- 2 layers100 × 100 mm

- 2 layers

Alim10o
acmo0/PedalBoard-Power-Supply-Diy
This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.
110 parts14GPL-3.0 - 4 layers66.1 × 75.8 mm

Stm audio board V3
Papproni/Digital_guitar_effect
This repostiroy is created to work on a digital guitar effect which makes use of DSP algorythms, and hardware.
149 parts10MIT - 2 layers212.3 × 100 mm

Questions
How big is the PSU Board PCB?
It measures 99.1 × 40.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PSU Board use?
17 parts, built around the L7809, L7909 and W10M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PSU Board KiCad files?
From the MilosSubotic/OSuRV_2024 repository on GitHub, at the commit this page was made from: the board is Embedded/AC_Logger/HW/PSU_Board/PSU_Board.kicad_pcb and its schematic Embedded/AC_Logger/HW/AFE/AFE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PSU Board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).