
Mlx90632 rigid
Cream-Pan/mlx90632_rigid
MLX90632 ├── Thermopile ├── Ambient Temperature Sensor ├── ADC ├── RAM └── EEPROM

CV collar is an open-source printed circuit board by MikiAlexo, from the MikiAlexo/CV-collar-PCB repository on GitHub. It is a 2-layer board of 111.8 × 54.2 mm with 42 parts on 57 nets, routed with 351 tracks and 51 vias.
It is built around the ESP32-WROOM-32, MLX90632SLD-DCB-000-RE and CW2015CHBD, with the DS3231MZ+, LSM6DS3 and AO3401A among its other parts. Its parts include 11 capacitors, 11 resistors, 7 connectors, 6 ICs and 2 transistors. It belongs with the ESP32 boards of this library.
"# CV-collar-PCB"
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C4, C6, C7 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7, R13 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C11, C12 |
| 3 | 4.7K | Resistor_SMD:R_0603_1608Metric | R3, R8, R9 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 100uF | Capacitor_SMD:CP_Elec_6.3x5.4 | C10 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 2.2uH | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C9 |
| 1 | 36.5K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | Addr_SW | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | BATT_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | BOOT | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG | SW1 |
| 1 | CR2032 | Battery:BatteryHolder_Keystone_1060_1x2032 | BT1 |
| 1 | CW2015CHBD | easyeda2kicad:TDFN-8_L3.0-W2.0-P0.50-BL-EP | U5 |
| 1 | DS3231M | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | DTR_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | Debug_SW | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | EN | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxG | SW2 |
| 1 | ESP32-WROOM-32 | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | IRLML6401 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | LSM6DS3 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U7 |
| 1 | MLX90632SLD-DCB-000-RE | footprint:SENSOR-SMD_MLX90632 | U6 |
| 1 | MTHR_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | TPS63900 | Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalVias | U4 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
The 41 most common of 42 parts.

Cream-Pan/mlx90632_rigid
MLX90632 ├── Thermopile ├── Ambient Temperature Sensor ├── ADC ├── RAM └── EEPROM







It measures 111.8 × 54.2 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the ESP32-WROOM-32, MLX90632SLD-DCB-000-RE, CW2015CHBD and DS3231MZ+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MikiAlexo/CV-collar-PCB repository on GitHub, at the commit this page was made from: the board is CV-collar.kicad_pcb and its schematic CV-collar.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MikiAlexo before reusing the design.