4 layers36 × 69 mm
4 layers57.2 × 37 mm
Eval board-1 buck regulator
MicroType-Engineering/eval-board-1_buck-regulator12- Size
- 57.2 × 37 mm
- Copper layers
- 4
- Thickness
- 4.69 mm
- Parts
- 50
- Nets
- 32
- Pads
- 145
- Tracks, vias
- 219, 159
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210824)
- Created
- 31 Jul 2021
- Updated
- 21 Oct 2021
Overview
Eval board-1 buck regulator is an open-source printed circuit board by MicroType-Engineering, from the MicroType-Engineering/eval-board-1_buck-regulator repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 57.2 × 37 mm with 50 parts on 32 nets, routed with 219 tracks and 159 vias.
It is built around the GRM32ER71C226KEA8, UCH1V470MCS1GS and PA4343.102NLT. Its parts include 19 capacitors, 15 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the power boards of this library.
Main components
3
GRM32ER71C226KEA8
121016V 22uF X7R ±10% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSMurataMultilayer Ceramic Capacitors MLCC - SMD/SMT
UCH1V470MCS1GS
SMD,D6.3xL7.7mm-40℃~+125℃ 197mA@100kHz 2000hrs@125℃ 300mΩ@100kHz 35V 47uF Polarized ±20% SMD,D6.3xL7.7mm Aluminum Electrolytic Capacitors - SMD ROHSNichiconAluminum Electrolytic Capacitors - SMDPA4343.102NLT
-1.7mΩ 1uH 30A 48A ±20% - Power Inductors ROHSPulse ElecPower Inductors
README
README.mdeval-board-1_buck-regulator
Parts
50| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10K | eval-board-1_buck-regulator:CAPACITOR_0402N | R2, R5, R7, R10, R12, R13 |
| 6 | GRM32ER71E226ME15K | eval-board-1_buck-regulator:CAPACITOR_1210N | C5, C6, C8, C9, C11, C13 |
| 4 | 220 | eval-board-1_buck-regulator:CAPACITOR_0402N | R1, R3, R4, R15 |
| 4 | GRM32ER71C226KEA8 | eval-board-1_buck-regulator:CAPACITOR_1210N | C1, C16, C17, C18 |
| 4 | UCH1V470MCS1GS | eval-board-1_buck-regulator:CAPAE660X580L260X65N | C2, C3, C4, C19 |
| 3 | 8.87K | eval-board-1_buck-regulator:CAPACITOR_0402N | R8, R9, R11 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_Via | H1, H2, H3 |
| 2 | Conn_01x02 | eval-board-1_buck-regulator:1935776 | J1, J3 |
| 2 | LED | eval-board-1_buck-regulator:CAPACITOR_0603N | D1, D2 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2 |
| 1 | 0.1uF | eval-board-1_buck-regulator:CAPACITOR_0402N | C15 |
| 1 | 1u | eval-board-1_buck-regulator:CAPACITOR_0402N | C12 |
| 1 | 2.2 | eval-board-1_buck-regulator:CAPACITOR_0402N | R14 |
| 1 | 4.7u | eval-board-1_buck-regulator:CAPACITOR_0603N | C10 |
| 1 | 510 | eval-board-1_buck-regulator:CAPACITOR_0402N | R6 |
| 1 | 74279221100 | eval-board-1_buck-regulator:CAPACITOR_1206N | FB1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | GRM188R61H225ME11D | footprints:CAPACITOR_0603N | C7 |
| 1 | GRM188R61H225ME11D | eval-board-1_buck-regulator:CAPACITOR_0603N | C14 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | Jumper_NC_Dual | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | LOGO | footprints:MTE_LOGO_25.4MM | G*** |
| 1 | PA4343.102NLT | eval-board-1_buck-regulator:PA4343_PM4343 | L1 |
| 1 | SIC453ED-T1-GE3 | eval-board-1_buck-regulator:SiC45X | U1 |
Similar boards
- 4 layers55 × 35 mm
Pocketbeagle
beagleboard/pocketbeagle
BeagleBoard.org PocketBeagle - ultra small, ultra flexible, ultra affordable
50 parts284CC-BY-4.0 - 4 layers44 × 48 mm
- 4 layers51 × 48 mm
- 4 layers116.8 × 121.8 mm
Se30
rhalkyard/SEthernet
Modern, low-cost 10/100 Ethernet for the Macintosh SE and SE/30
50 parts167GPL-3.0 - 4 layers126.6 × 37.7 mm
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition
50 parts101MIT - 4 layers36 × 77 mm
- 4 layers100 × 100 mm
Questions
How big is the Eval board-1 buck regulator PCB?
It measures 57.2 × 37 mm and has 4 copper layers, 4.69 mm thick.
What parts does the Eval board-1 buck regulator use?
50 parts, built around the GRM32ER71C226KEA8, UCH1V470MCS1GS and PA4343.102NLT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Eval board-1 buck regulator KiCad files?
From the MicroType-Engineering/eval-board-1_buck-regulator repository on GitHub, at the commit this page was made from: the board is kicad_proj/eval-board-1_buck-regulator/eval-board-1_buck-regulator.kicad_pcb and its schematic kicad_proj/eval-board-1_buck-regulator/eval-board-1_buck-regulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Eval board-1 buck regulator design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).