

Watch
My take on building a watch.
- Size
- 27.4 × 41.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 30
- Pads
- 107
- Tracks, vias
- 307, 35
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 23 Mar 2015
- Updated
- 25 Mar 2015
Overview
Watch is an open-source printed circuit board by Miceuz, from the Miceuz/geek-watch repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 27.4 × 41.7 mm with 23 parts on 30 nets, routed with 307 tracks and 35 vias.
It is built around the ATMEGA48A-MU. Its parts include 12 diodes, 3 capacitors, 3 resistors, 1 IC and 1 crystal. It belongs with the wearables boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdgeek-watch
My take on building a watch.

Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | LED_DUAL | w_smd_leds:DUAL_LED | D1, D2, D3, D4, D5, D6, D7, D8, D10, D11, D12 |
| 3 | R | w_smd_resistors:r_0603 | R1, R2, R3 |
| 2 | C | w_smd_cap:c_0402 | C1, C3 |
| 1 | ATMEGA48A-M | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | IC1 |
| 1 | BATTERY | bk-192:BATT | BT1 |
| 1 | C | w_smd_cap:c_0603 | C2 |
| 1 | CRYSTAL | w_smd_cap:c_1206 | X1 |
| 1 | LED_DUAL | DUAL_LED | D9 |
| 1 | LOGO | w_logo:Logo_soldermask_OSHW_6x6mm | G*** |
| 1 | Val** | w_pin_strip:pin_socket_2mm_3x2 | PIN_SOCKET_2MM_3x2 |
Similar boards
- 2 layers48.5 × 108 mm

- 2 layers19 × 15.9 mm

- 2 layers88.8 × 45.5 mm

Zulassungskarte
stonedDiscord/Automatenplatinen
Reverse engineerte Hardware aus deutschen Spielautomaten.
41 parts5BSD-2-Clause - 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

Questions
How big is the Watch PCB?
It measures 27.4 × 41.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Watch use?
23 parts, built around the ATMEGA48A-MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Watch KiCad files?
From the Miceuz/geek-watch repository on GitHub, at the commit this page was made from: the board is watch.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Watch design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).