

Robotika
UAS Pemrograman Robotika
- Size
- 70 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 45
- Pads
- 134
- Tracks, vias
- 173, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Apr 2024
- Updated
- 7 May 2024
Overview
Robotika is an open-source printed circuit board by MewnianSquire, from the MewnianSquire/Robotika repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 50 mm with 29 parts on 45 nets, routed with 173 tracks and 12 vias.
It is built around the CH340C, ESP-12F and L293D, with the AMS1117-3.3 and L7805 among its other parts. Its parts include 10 capacitors, 6 ICs, 4 connectors, 3 resistors and 2 switches. It belongs with the ESP8266 boards of this library.
Main components
5CH340C
SOP-16-20℃~+70℃ 2Mbps 3.3V、5V 50uA 7mA Transceiver USB 2.0 SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersESP-12F
SMD,24x16mm-40℃~+85℃ -96dBm 15dBm 2.4GHz 3.3V 375mA 55mA PCB UART WIFI4 SMD,24x16mm WiFi Modules ROHSDOITWiFi ModulesL293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor DriverAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdRobotika
UAS Pemrograman Robotika.
Soal praktik UAS Pemrograman Robotika.
RC Car dengan ukuran kecil.
Specs:
- MCU = WeMos D1 Mini (ESP8266)
- Drive motors = DC Motor
- Motor driver = L293D
- RGB lights = WS2812B Smart LED Strip RGB
To-Do:
- steering = pakai program / pwm
- led strip, added to pcb, program?
Update: 14/4/2024 - PCB done, 2 versions available: With/without LED using 4 wire SPI
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C4, C7, C8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C5, C9 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C6 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1, U4 |
| 1 | 100u | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C10 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 9v BATTERY | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP-12F | RF_Module:ESP-12E | U3 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U6 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-263-2 | U5 |
| 1 | MOTOR1 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | MOTOR2 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
| 1 | power | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | SW2 |
More from MewnianSquire/Robotika
1- 2 layers50 × 60 mm

Similar boards
- 2 layers50.8 × 61 mm

- 2 layers440 × 150 mm

- 2 layers51.5 × 76.5 mm

Esp rfm
Phunkafizer/RFM-gateway
Hard- and software for the RFM-gateway, a universal platform for integrating sub-GHz radio into your WiFi network
47 parts1MIT - 2 layers49.6 × 27.3 mm

Custom esp12f
mekatronik-achmadi/example_collection
Store My Personal Examples on Development Topics
17 parts2 - 2 layers

- 2 layers84.3 × 56.9 mm

Ebus
piwko28/smart-home-ebus-adapter
eBUS adapter PCB for use with ebusd-esp firmware as well as with other UART devices.
51 parts18GPL-3.0 - 2 layers82 × 81 mm

- 2 layers

Questions
How big is the Robotika PCB?
It measures 70 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Robotika use?
29 parts, built around the CH340C, ESP-12F, L293D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Robotika KiCad files?
From the MewnianSquire/Robotika repository on GitHub, at the commit this page was made from: the board is archive versi sblm WeMos/robotika.kicad_pcb and its schematic WEMOS VER/wemos/wemos.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Robotika design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).