

Norns shield-210330
norns shield variant with hardware MIDI in/out
- Size
- 85 × 79.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 73
- Pads
- 308
- Tracks, vias
- 531, 57
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 Jan 2025
- Updated
- 1 Jan 2025
Overview
Norns shield-210330 is an open-source printed circuit board by Merlin04, from the Merlin04/norns-shield-midi repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 85 × 79.9 mm with 95 parts on 73 nets, routed with 531 tracks and 57 vias.
It is built around the CS4270-CZZ and HCPL0731R2. Its parts include 33 resistors, 30 capacitors, 4 switches, 3 ICs and 2 connectors. It belongs with the audio and music boards of this library.
Main components
2CS4270-CZZ
TSSOP-24-10℃~+70℃ 3.1V~5.25V 4kHz~216kHz Encoder/decoder Serial TSSOP-24 Audio Interface ICs ROHSCirrus LogicAudio Interface ICsHCPL0731R2
SOIC-8-40℃~+85℃ -500mV~18V 1.35V 100mW 100us 10kV/us 2 2.5kV 20mA 20us 500% 5V 60mA DC SOIC-8 Logic Output Optoisolators ROHSonsemiLogic Output Optoisolators
README
README.mdnorns-shield-midi
norns shield variant with hardware MIDI in/out (TRS minijack connectors), based on the 210330 version of the original norns shield

also:
- PCB files ported to kicad
- board outline cleaned up a bit (slightly smaller? probably won't matter)
- MIDI in works with Type-A or Type-B (circuit based on LPZW auto-crossover MIDI input, same as shieldXL i think?)
- MIDI out has a switch to choose between Type-A and Type-B
getting one
this design is currently untested but boards are on the way to me. once i get them, finish assembly, and test one, i'll (try to remember to) update this page.
i'll have a few extra boards (with SMT components assembled), if you're interested in buying one from me for cost of parts+shipping feel free to reach out - discord username is same as github username, and i'm @m04 on lines
Parts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R10, R11, R13, R15, R26, R28, R29, R32, R34, R35, R38, R40 +8 |
| 12 | TPTP12R | norns-shield-210330:TP12R | /INA0, /INB0, /LRCK0, /MCLK0, /OUTA0, /OUTB0, /RESET0, /SCL0, /SCLK0, /SDA0, /SDIN0, /SDOUT0 |
| 11 | 10n | Capacitor_SMD:C_0603_1608Metric | C3, C35, C36, C38, C39, C41, C42, C44, C45, C46, C88 |
| 6 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C4, C6, C8, C47, C63 |
| 5 | 10u | Capacitor_SMD:C_0805_2012Metric | C2, C5, C10, C12, C43 |
| 3 | ENC | norns-shield-210330:PEC11RN | E1, E2, E3 |
| 3 | PVA1 | norns-shield-210330:PVA1 | SW1, SW2, SW3 |
| 2 | @HOLE0, @HOLE1 | ||
| 2 | 150 | Resistor_SMD:R_0603_1608Metric | R16, R17 |
| 2 | 220p COG | Capacitor_SMD:C_0603_1608Metric | C11, C13 |
| 2 | 2700p COG | Capacitor_SMD:C_0603_1608Metric | C15, C17 |
| 2 | 3.3u | Capacitor_SMD:C_0805_2012Metric | C14, C16 |
| 2 | 4.99k | Resistor_SMD:R_0603_1608Metric | R7, R9 |
| 2 | 47u | Capacitor_SMD:C_1206_3216Metric | C7, C9 |
| 2 | 590 | Resistor_SMD:R_0603_1608Metric | R12, R14 |
| 2 | 65 | Resistor_SMD:R_0603_1608Metric | R6, R18 |
| 2 | JACK-TRS-SW | norns-shield-210330:JACK4832.2330 | J-IN0, J-OUT0 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | ASFL-12.288mhz | norns-shield-210330:ASF | Q1 |
| 1 | CS4270 | norns-shield-210330:TSSOP24 | U1 |
| 1 | FERRITE | Inductor_SMD:L_0805_2012Metric | L3 |
| 1 | HCPL-0731 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MIDI in | norns-shield-210330:JACK4832.2330 | J1 |
| 1 | MIDI out | norns-shield-210330:JACK4832.2330 | J2 |
| 1 | OLED128X64 | norns-shield-210330:OLED-ALEPH | U$1 |
| 1 | RASPI_BOARD_B+#_E3 | norns-shield-210330:RASPI_BOARD_B+_EDGES_3DRILL | X1 |
| 1 | SW_DPDT_x2 | JS202011JAQN:JS202011JAQN | SW4 |
| 1 | TPS793 | norns-shield-210330:SSOP6 | U11 |
Similar boards
- 2 layers132.5 × 84.8 mm

- 4 layers60 × 95 mm

STM32H7 GuitarPedal
GuitarML/GuitarPedalSTM32
Guitar pedal using a stm32h7 microcontroller programmed with CubeIDE (PCB and Firmware)
101 parts100MIT - 2 layers100 × 100 mm

- 2 layers

- 2 layers100 × 100 mm

- 2 layers54 × 48.9 mm

Guitarpreamp
StoneRose35/cortexguitarfx
guitar effects processor implemented on various arm cortex platforms
49 parts146 - 2 layers75 × 100 mm

Projectm eurorack
adeboni/eurorack
This repository stores various eurorack module designs I've made
60 parts1GPL-3.0 - 2 layers100 × 100 mm

Canbus controller
adeboni/laser-projector
This project is for a quadruple laser projection controller, aimed at supporting room-scale projections
78 partsGPL-3.0
Questions
How big is the Norns shield-210330 PCB?
It measures 85 × 79.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Norns shield-210330 use?
95 parts, built around the CS4270-CZZ and HCPL0731R2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Norns shield-210330 KiCad files?
From the Merlin04/norns-shield-midi repository on GitHub, at the commit this page was made from: the board is norns-shield-210330.kicad_pcb and its schematic norns-shield-210330.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Norns shield-210330 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).