
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

a super cool nixie clock
Delorean is an open-source printed circuit board by MeghanaM4, from the MeghanaM4/delorean repository on GitHub, published under the MIT licence. It is a 2-layer board of 160.4 × 77.5 mm with 22 parts on 102 nets, routed with 738 tracks and 37 vias.
Its parts include 7 ICs and 6 resistors. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
A super cool nixie clock made with a custom PCB powered by a raspberry pi pico W.
I recently discovered nixie tubes and was like "I should totally make something with that". I wanted to make something a bit more complicated for my first go, but this clock sets me up pretty well do to some cooler stuff (and will make for a pretty awesome present).
I've been trying to get better at Inventor (people keep shaming me for using Fusion, so), and this project was a good way to ease back into it. I was also painfully reminded of how hard it is to CAD without a mouse.
This is my 3rd PCB, and while it took a lot less time than my first, it was still a hassle to route all those nixie tubes. Pretty happy with the way it turned out, and might have to add some more silkscreen stuff to it.
If you want to learn how I'm making this, check out the journal
| Item | Qty | Cost/item | Total Cost |
|---|---|---|---|
| IN-12 nixie tubes | 6 | $5.08 | $30.50 |
| K155ID1 controller chip | 6 | $1 | $6 |
| 5V to 170V boost converter | 1 | 10.50 | $10.50 |
| Raspberry Pi Pico W | 1 | $7.65 | $7.65 |
| DIP-16 chip connecter | 6 | $0.25 | $1.50 |
| Dsub pins | 100 | $0.10 | $9.58 |
| Custom PCB from JLCPCB | 1 | ~$10 | ~$10 |
| USB Isolator | 1 | $9.99 | $9.99 |
| USB A to C | 1 | $1.29 | $1.29 |
| Estimated shipping | $15 | ||
| Total | $101.72 |
View the full BOM here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 11kΩ | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6 |
| 6 | IN-12A | footprints:IN-12 | NX1, NX2, NX3, NX4, NX5, NX6 |
| 6 | K155ID1 | footprints:K155ID1 | U2, U3, U4, U5, U6, U7 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | RaspberryPi_Pico_W | Module:RaspberryPi_Pico_Common_THT | A1 |
| 1 | boost_conv | footprints:boost_conv | U1 |

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 160.4 × 77.5 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MeghanaM4/delorean repository on GitHub, at the commit this page was made from: the board is KiCAD/delorean.kicad_pcb and its schematic KiCAD/delorean.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).