
PCB 2MMouse
McK11on/Micromouse-Design
Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies

Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies
PCB 2MMouse - RESPALDO is an open-source printed circuit board by McK11on, from the McK11on/Micromouse-Design repository on GitHub. It is a 2-layer board of 70 × 90 mm with 77 parts on 62 nets, routed with 306 tracks and 7 vias.
It is built around the STM32F103C8T6, TB6612FNG,C,8,EL and AMS1117-3.3, with the AMS1117-5.0 and IRLML6344TRPBF among its other parts. Its parts include 25 capacitors, 21 resistors, 8 transistors, 8 connectors and 7 diodes. It belongs with the STM32 boards of this library.
Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies

| Layout | PCB_1 | PCB_2 |
|---|---|---|
![]() | ![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C9, C11, C12, C13, C14, C15, C17, C19, C20, C21, C22, C23, C24, C25 |
| 6 | 4.7K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R12, R13, R14, R15, R16 |
| 5 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R18 |
| 5 | 10uF/10V | Capacitor_Tantalum_SMD:CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder | C6, C8, C10, C16, C18 |
| 4 | 20pF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C4 |
| 4 | 70 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4 |
| 4 | IRLML6344TRPBF | IRLML6344TRPBF:SOT95P237X112-3N | Q5, Q6, Q7, Q8 |
| 4 | IR_LEFT | LED_THT:LED_D3.0mm | D1, D2, D3, D4 |
| 4 | Q_Photo_NPN_CE | LED_THT:LED_D3.0mm | Q1, Q2, Q3, Q4 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D5, D6, D7 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20, R21 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9 |
| 1 | 13K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 250 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R19 |
| 1 | 830003000 | Resonador:830003000 | Y1 |
| 1 | 8MHz | Crystal:Crystal_HC18-U_Vertical | Y2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Batery | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.00mm:PinHeader_2x03_P2.00mm_Vertical | J1 |
| 1 | FreePins | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J2 |
| 1 | Gyro | Connector_PinSocket_2.00mm:PinSocket_1x04_P2.00mm_Vertical | J5 |
| 1 | L_Motor | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J7 |
| 1 | RESET | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1 |
| 1 | R_Motor | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J8 |
| 1 | STM32F103C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SWD | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J4 |
| 1 | SW_SPDT | Button_Switch_THT:SW_CuK_JS202011CQN_DPDT_Straight | SW2 |
| 1 | TB6612FNG,C,8,EL | TB6612FNG:SOP65P760X160-24N | IC1 |
| 1 | UART | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J3 |

McK11on/Micromouse-Design
Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies

MacroVirux/Melvin_Nunez_Microcontroladores_2025_C1
Documentación de trabajos y tareas.


landodoughty/Flight-Controller
A Custom Flight Controller PCB I designed for one of my science fair projects.

r-ilija/dht11-weather-station
KiCad PCB project for a DHT11-based weather station.



wattnotions/povbot2
Look in 3dprint folder to find a 3mf file with the chassis , camera holder and wheels ready to print.

It measures 70 × 90 mm and has 2 copper layers, 1.6 mm thick.
77 parts, built around the STM32F103C8T6, TB6612FNG,C,8,EL, AMS1117-3.3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the McK11on/Micromouse-Design repository on GitHub, at the commit this page was made from: the board is PCB_2MMouse/PCB_2MMouse - RESPALDO.kicad_pcb and its schematic PCB_2MMouse/Descartados.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask McK11on before reusing the design.