Skip to the content
2 layers99.3 × 54.4 mmSyncDongle, the printed circuit board in 3D

This project aims to make a Alfaskop 4110 running towards the Hercules IBM emulator and run the MEMO SW.

Size
99.3 × 54.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
95
Pads
168
Tracks, vias
355, 26
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
22 Aug 2019
Updated
5 Apr 2022

Overview

SyncDongle is an open-source printed circuit board by MattisLind, from the MattisLind/alfaskop_emu repository on GitHub. It is a 2-layer board of 99.3 × 54.4 mm with 17 parts on 95 nets, routed with 355 tracks and 26 vias.

It is built around the MAX208CWG+T. Its parts include 11 capacitors, 3 ICs, 2 connectors and 1 switch. It belongs with the STM32 boards of this library.

Main components

1

README

hardware/SyncDongle/README.md

SyncDongle

SyncDongle picture

SyncDongle is a STM32F103 BluePill or STM32F4x1 Weact blackpill board that interfaces to a sync port. It has the STM32 CPU card and a couple of MAX208 RS-232 level converters, a DB25 connector, a DE9 connector and 10 pin DIP switch / wire wrap area to set various configurations of the serial port. At this point the firmware available only support the STM32F103 BluePill. Support for the Weact black pill will be added later on.

Parts

17
QtyValueFootprintReferences
100.1uCapacitor_THT:C_Rect_L7.0mm_W2.5mm_P5.00mmC2, C3, C4, C5, C6, C7, C8, C9, C10, C11
2MAX208CWGPackage_DIP:DIP-24_W7.62mm_LongPadsU2, U3
110uCapacitor_THT:CP_Radial_D8.0mm_P5.00mmC1
1DB25_Male_MountingHolesConnector_Dsub:DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ2
1DB9_Female_MountingHolesConnector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mmJ1
1STM32BluePillPackage_DIP:DIP-40_W15.24mm_LongPadsU1
1SW_DIP_x10Package_DIP:DIP-20_W7.62mm_LongPadsSW1

Similar boards

  • 2 layers50 × 35 mmServo power, the printed circuit board in 3D

    Servo power

    earthtojake/text-to-cad

    Design physical products with AI

    17 parts26kMIT
  • 2 layers139.7 × 62.2 mmBreakout 60pin EEC IV, the printed circuit board in 3D

    Breakout 60pin EEC IV

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    17 parts1.2k
  • 2 layers29.2 × 55.9 mmDeniseadapter, the printed circuit board in 3D

    Deniseadapter

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    17 parts1kGPL-3.0
  • 2 layers24.5 × 36.5 mmCluster, the printed circuit board in 3D

    Cluster

    JesusFreke/lalboard

    A 3D-printed keyboard inspired by the DataHand

    17 parts993
  • 2 layers56.3 × 55.7 mmStarNecklace, the printed circuit board in 3D

    StarNecklace

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    17 parts915
  • 2 layers25 × 25 mmSmallEncoder, the printed circuit board in 3D

    SmallEncoder

    DDeGonge/OS-ARM

    This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…

    17 parts498MIT
  • 2 layers38.9 × 16.1 mmAmoeba spc, the printed circuit board in 3D

    Amoeba spc

    mtl/keyboard-pcbs

    Keyboard PCBs

    17 parts485
  • 2 layers36 × 51 mmABSIS ALE, the printed circuit board in 3D

    ABSIS ALE

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    17 parts431

Questions

How big is the SyncDongle PCB?

It measures 99.3 × 54.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SyncDongle use?

17 parts, built around the MAX208CWG+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SyncDongle KiCad files?

From the MattisLind/alfaskop_emu repository on GitHub, at the commit this page was made from: the board is hardware/SyncDongle/SyncDongle.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the SyncDongle design in my own project?

Its repository states no licence, so its author keeps all rights: ask MattisLind before reusing the design.