2 layers175 × 105 mm
4 layers166 × 73 mm
SMA Feedthrough Board
MatthijsRog/Teslatron-BOBBreakout box for the Teslatron.
- Size
- 166 × 73 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 56
- Nets
- 31
- Pads
- 145
- Tracks, vias
- 165, 252
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 14 Feb 2024
- Updated
- 11 Apr 2024
Overview
SMA Feedthrough Board is an open-source printed circuit board by MatthijsRog, from the MatthijsRog/Teslatron-BOB repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 166 × 73 mm with 56 parts on 31 nets, routed with 165 tracks and 252 vias.
Its parts include 20 resistors, 13 connectors and 8 capacitors.
Parts
56| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R15, R16, R17, R18, R19, R20 |
| 12 | Conn_Coaxial | Amphenol_Right_Angle_SMA_901_143_6RFX:AMPHENOL_901-143-6RFX | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 9 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4, H6, H7, H8, H9, H10 |
| 8 | 47 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9, R10, R11, R12, R13, R14 |
| 4 | 1n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4 |
| 4 | 270p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C7, C8 |
| 4 | FerriteBead | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | FB1, FB2, FB3, FB4 |
| 1 | DE9_Receptacle | 5-1393480-5_Right_Angle_Female_Panel:1-5393480-5 | J13 |
| 1 | LOGO | LOGO | G*** |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H5 |
More from MatthijsRog/Teslatron-BOB
1Similar boards
- 4 layers30.7 × 30 mm
ReCamera B101 v1.2
Seeed-Studio/OSHW-reCamera-Series
reCamera is a series of open-source AI cameras.
56 parts495Apache-2.0 - 4 layers90.8 × 53.3 mm
- 4 layers46 × 40 mm
- 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers71 × 10 mm
Ordered jlcpcb 003 dot flipper
pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.
56 parts145GPL-3.0 - 4 layers93.3 × 60.3 mm
Arduino 386EX V5
dbalsom/arduinoX86
An interface between an Arduino Due or Arduino GIGA and 8088, 8086, V20, V30, 186 or 286 CPUs
56 parts114 - 4 layers80 × 156 mm
Supercap simple
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
56 parts81 - 4 layers52.8 × 61.2 mm
GameboyCartridgeV1.1
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.
56 parts72CERN-OHL-P-2.0
Questions
How big is the SMA Feedthrough Board PCB?
It measures 166 × 73 mm and has 4 copper layers, 1.6 mm thick.
What parts does the SMA Feedthrough Board use?
56 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SMA Feedthrough Board KiCad files?
From the MatthijsRog/Teslatron-BOB repository on GitHub, at the commit this page was made from: the board is PCB Design/SMA_Feedthrough_Board/SMA_Feedthrough_Board.kicad_pcb and its schematic PCB Design/GND_Switch_Board/GND_Switch_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SMA Feedthrough Board design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).