
Engine Controller
cacost12/SDR-Liquid-Engine-Controller-PCB
Current PCB Revision: 4.0 PCB Part Number: L0002

Github Repository for the SSA co. LED board for the PCB workshop. Here is my KiCad file for the design, I will also include all of the relevant information pertaining to the board
SSA LED Board 1 is an open-source printed circuit board by Matt-Scala, from the Matt-Scala/SSA_LED_Board repository on GitHub. It is a 2-layer board of 80 × 50 mm with 43 parts on 29 nets, routed with 111 tracks and 13 vias.
It is built around the BCR401UW6 and EJ508A. Its parts include 32 diodes, 2 ICs, 1 resistor and 1 connector.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | D | Diode_SMD:D_0603_1608Metric | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +16 |
| 4 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3, H4 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | BCR401U | BCR401U:SOP95P250X110-6N-1 | U1, U2 |
| 1 | 25 ohms | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | EJ508A | EJ508A:MPD_EJ508A | J1 |

cacost12/SDR-Liquid-Engine-Controller-PCB
Current PCB Revision: 4.0 PCB Part Number: L0002


SunDevilRocketry/Liquid-Engine-Controller
Main microcontroller board for embedded control of SDR's liquid bipropellant engine.

SunDevilRocketry/Wheatstone-Bridge
Pressure transducer signal emulation board to facilitate electronics testing

GeneralCybernetics/Ion-Concentration-Biomodulator
PCB Designs and Documentation for a ion concentration biomodulator that induces HEK293T cells to reprogram and dedifferentiate into stem cells


Morethanmany2/Arduino-Uno
As a part of my day-to-day use, i tried to design the Arduino UNO dev board using all the datasheet materials and footprints required for precise design.

It measures 80 × 50 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the BCR401UW6 and EJ508A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Matt-Scala/SSA_LED_Board repository on GitHub, at the commit this page was made from: the board is SSA_LED_Board_1/SSA_LED_Board_1.kicad_pcb and its schematic SSA_LED_Board_1/SSA_LED_Board_1-backups/SSA_LED_Board_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Matt-Scala before reusing the design.