2 layers35.4 × 29.7 mm
2 layers24.5 × 33.8 mm
Ornament
Matir/2017-ornament12017 Christmas Ornament
- Size
- 24.5 × 33.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 30
- Pads
- 66
- Tracks, vias
- 137, 12
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Nov 2017
- Updated
- 7 Dec 2017
Overview
Ornament is an open-source printed circuit board by Matir, from the Matir/2017-ornament repository on GitHub. It is a 2-layer board of 24.5 × 33.8 mm with 14 parts on 30 nets, routed with 137 tracks and 12 vias.
It is built around the ATTINY2313-20MU. Its parts include 6 diodes, 2 capacitors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | LED_Small | LEDs:LED_0805 | D1, D2, D3, D4, D5, D6 |
| 1 | 0.1u | Capacitors_SMD:C_0805 | C1 |
| 1 | 10u | Capacitors_SMD:C_0805 | C2 |
| 1 | 56 | Resistors_SMD:R_Array_Convex_8x0602 | RN1 |
| 1 | ATTINY2313-20MU | Housings_DFN_QFN:QFN-20-1EP_4x4mm_Pitch0.5mm | U1 |
| 1 | Battery_Cell | footprints:BAT_HLD | BT1 |
| 1 | ICSP | PinHeaders:Pin_Header_Straight_2x03_Pitch2.54mm_SMD | J1 |
| 1 | LOGO | footprints:Snowflake | G*** |
The 13 most common of 14 parts.
More from Matir/2017-ornament
1Similar boards
- 2 layers65 × 45 mm
- 2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0 - 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
Questions
How big is the Ornament PCB?
It measures 24.5 × 33.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ornament use?
14 parts, built around the ATTINY2313-20MU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ornament KiCad files?
From the Matir/2017-ornament repository on GitHub, at the commit this page was made from: the board is pcb/ornament.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ornament design in my own project?
Its repository states no licence, so its author keeps all rights: ask Matir before reusing the design.