
Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

Code de mes articles dans les magasines des éditions diamond
GbSwitchFp is an open-source printed circuit board by Martoni, from the Martoni/Diamond_HK_GLMF_OS repository on GitHub. It is a 4-layer board of 72 × 85 mm with 38 parts on 76 nets, routed with 411 tracks and 69 vias.
It is built around the TXS0108EPW. Its parts include 12 resistors, 9 connectors, 5 capacitors, 4 ICs and 3 diodes.
Code de mes articles dans les magazines des éditions diamond.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5 |
| 5 | 47k | Resistor_SMD:R_0603_1608Metric | R4, R6, R7, R9, R11 |
| 4 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5, J7, J8, J9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0 | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R12, R13 |
| 2 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2, J6 |
| 2 | LED | LED_SMD:LED_1206_3216Metric | D2, D3 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 82K | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | Conn_01x07_Female | GbSwitchMyLib:SNES_7PAD | J4 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | Conn_02x07_Odd_Even | GbSwitchMyLib:EDGE_14PIN_254 | J3 |
| 1 | DIODE | Diode_SMD:D_SOD-123 | D1 |
| 1 | LJ245A | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MicroSD_SPI_CD | GbSwitchMyLib:GCT-MEM2055-00-190-01-A | U4 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Tang_nano_4K | kicad:Tang_nano_4K | U3 |

FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board

MetalMusings/MyOwnEtherCATDevice
Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

NVIDIA-AI-IOT/my-jetson-nano-baseboard
An open source Jetson Nano baseboard and tools to design your own.

AndreiVladescu/ESP32-Bit-Pirate-Hardware
Carrier breaker-board for the ESP32-S3 Devkit. Works great with the ESP32-Bit-Pirate firmware.


scrapcomputing/ISABlaster
A software-defined ISA card powered by a Raspberry Pi Pico

florianbrede-ayet/esphome-toshiba-hvac-controller
ESPhome component & hardware to control Toshiba & Carrier HVAC units with WIFI interface

It measures 72 × 85 mm and has 4 copper layers, 4.69 mm thick.
38 parts, built around the TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Martoni/Diamond_HK_GLMF_OS repository on GitHub, at the commit this page was made from: the board is Hackable44/GbSwitchFp/GbSwitchFp.kicad_pcb and its schematic Hackable44/GbSwitchFp/GbSwitchFp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Martoni before reusing the design.