4 layers115.3 × 52.1 mm
MCU Board
MartinChauveliere/Xbox_Controller_PCB
Replication des PCB d'une manette Xbox modèle 1914
173 parts
4 layers91.8 × 66.4 mm
POWER BUTTON Board
MartinChauveliere/Xbox_Controller_PCBReplication des PCB d'une manette Xbox modèle 1914
- Size
- 91.8 × 66.4 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 211
- Nets
- 84
- Pads
- 635
- Tracks, vias
- 1,240, 615
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Jun 2025
- Updated
- 23 Jun 2025
Overview
POWER BUTTON Board is an open-source printed circuit board by MartinChauveliere, from the MartinChauveliere/Xbox_Controller_PCB repository on GitHub. It is a 4-layer board of 91.8 × 66.4 mm with 211 parts on 84 nets, routed with 1,240 tracks and 615 vias.
It is built around the MP1476LGTF and SSM3J328R,LF. Its parts include 55 capacitors, 30 resistors, 19 diodes, 14 switches and 10 transistors.
Main components
2README
README.mdXbox_Controller_PCB
Replication des PCB d'une manette Xbox modèle 1914
L'idée m'est venu lorsque j'ai voulu voir l'intérieur de mon ancienne manette Xbox One.
A l'aide donc d'un multimètre, de beaucoup de patience et de l'aide d'un forum, j'ai pu retracer l'entiereté de la manette mais surtout comprendre comment celle-ci fonctionne.
Vous retrouverez dans ce dépot, les schematiques et les tracés des PCB. L'objectif de base etait que ceux-ci soient les plus fidèles possible au modèle original.
Ce projet avait pour but de m'améliorer encore plus en electronique et aussi de design mon 1er 4 layers PCB.
Lien forum : https://acidmods.com/forum/index.php?topic=44711.0
Parts
211| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | TestPoint | 0_MyLibrary:Xbox_TestPoint_0.8mm | FT4, TP13, TP14, TP15, TP16, TP18, TP19, TP20, TP21, TP22, TP23, TP24, TP25, TP26, TP27, TP28 +14 |
| 22 | R | Resistor_SMD:R_0402_1005Metric | R1, R10, R13, R21, R22, R23, R25, R26, R27, R29, R36, R37, R38, R44, R45, R47 +6 |
| 19 | C | Capacitor_SMD:C_0201_0603Metric | C3, C10, C11, C17, C18, C24, C40, C309, C320, C323, C326, C328, C330, C331, C332, C334 +3 |
| 18 | C | Capacitor_SMD:C_0402_1005Metric | C2, C4, C8, C9, C13, C16, C20, C23, C26, C30, C31, C32, C34, C306, EG4, EG5 +2 |
| 11 | C | 0_MyLibrary:Xbox_C_01005_0402Metric | C1, C12, C14, C15, C28, C36, C37, C45, C46, C48, C50 |
| 10 | DNI | Diode_SMD:D_0201_0603Metric | CR2, CR3, D1, D4, D5, D6, D7, D8, D11, D18 |
| 10 | R | 0_MyLibrary:Xbox_R_01005_0402Metric | R?1, R?2, R?3, R?4, R?5, R3, R16, R18, R53, R54 |
| 4 | L | Inductor_SMD:L_0402_1005Metric | L1, Z2, Z3, Z4 |
| 4 | PNP | 0_MyLibrary:SOT-523_LongPad | Q8, Q11, Q12, Q14 |
| 4 | SSM3J328R | Package_TO_SOT_SMD:SOT-23W | Q6, Q7, Q10, Q13 |
| 4 | T4 | 0_MyLibrary:Xbox_Diode | D2, D25, D27, D30 |
| 3 | C | Capacitor_SMD:C_01005_0402Metric | C21, C22, C41 |
| 3 | D | Diode_SMD:D_0201_0603Metric | D3, D10, EG2 |
| 3 | D | Diode_SMD:D_01005_0402Metric | D14, D16, D17 |
| 3 | D2 | 0_MyLibrary:Xbox_Diode | D22, D32, D73 |
| 3 | DNI | 0_MyLibrary:Xbox_R_01005_0402Metric | EG3, R55, R56 |
| 3 | R | Resistor_SMD:R_0201_0603Metric | R17, R24, R41 |
| 3 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | P1, P2, P3 |
| 2 | 0 | Resistor_SMD:R_0402_1005Metric | R4, R7 |
| 2 | 2R2 | Inductor_SMD:L_APV_ANR4010 | L5, L6 |
| 2 | Conn_01x02 | 0_MyLibrary:Xbox_AntennaConnector | J5, J8 |
| 2 | DNI | Diode_SMD:D_01005_0402Metric | D15, D28 |
| 2 | R | Resistor_SMD:R_01005_0402Metric | R46, R51 |
| 1 | 4R7 | Inductor_SMD:L_APV_ANR4010 | L2 |
| 1 | A | 0_MyLibrary:Xbox_SwitchContactPad | SW11 |
| 1 | A2 | 0_MyLibrary:Xbox_Diode | D26 |
| 1 | AA+ | 0_MyLibrary:Xbox_BatteryHolder1 | WH1 |
| 1 | AA- | 0_MyLibrary:Xbox_BatteryHolder2 | WH2 |
| 1 | Antenna | 0_MyLibrary:Xbox_RFAntenna2 | AE1 |
| 1 | Antenna | 0_MyLibrary:Xbox_RFAntenna | AE2 |
| 1 | C | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | C | Capacitor_SMD:C_0504_1310Metric | C6 |
| 1 | C | Inductor_SMD:L_0402_1005Metric | Z1 |
| 1 | C | Capacitor_SMD:C_1206_3216Metric | C33 |
| 1 | Choke_Coilcraft_0603USB-142 | Inductor_SMD:L_CommonModeChoke_Coilcraft_0603USB | CM1 |
| 1 | Conn_01x01 | 0_MyLibrary:Xbox_OtherConnector | J4 |
| 1 | Conn_01x05 | 0_MyLibrary:Xbox_CoaxConnector2 | J6 |
| 1 | Conn_02x07 | Connector_PinSocket_1.27mm:PinSocket_2x07_P1.27mm_Vertical_SMD | J3 |
| 1 | D | 0_MyLibrary:Xbox_Diode | CR1 |
| 1 | D | 0_MyLibrary:Xbox_R_01005_0402Metric | EG1 |
| 1 | DD | 0_MyLibrary:Xbox_SwitchContactPad2 | SW12 |
| 1 | DL | 0_MyLibrary:Xbox_SwitchContactPad2 | SW9 |
| 1 | DNI | Capacitor_SMD:C_0603_1608Metric | C35 |
| 1 | DNI | Resistor_SMD:R_01005_0402Metric | D13 |
| 1 | DNI | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R59 |
| 1 | DR | 0_MyLibrary:Xbox_SwitchContactPad2 | SW10 |
| 1 | DU | 0_MyLibrary:Xbox_SwitchContactPad2 | SW6 |
| 1 | GU | 0_MyLibrary:Xbox_XboxButton | SW13 |
| 1 | H3 | 0_MyLibrary:Xbox_Diode | D29 |
| 1 | LB | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW1 |
| 1 | MN | 0_MyLibrary:Xbox_SwitchContactPad | SW5 |
| 1 | MP1476L | Package_TO_SOT_SMD:SOT-563 | U1 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q9 |
| 1 | NPN | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | RB | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFS | SW3 |
| 1 | SH | 0_MyLibrary:Xbox_SwitchContactPad | SW14 |
| 1 | SY | 0_MyLibrary:Xbox_VerticalSwitch | SW2 |
| 1 | TCA6416RTWR | Package_DFN_QFN:WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm | U4 |
| 1 | TPS613221 | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | TPS613226 | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_2.5x2.5mm | TP3 |
| 1 | USB_C_Plug_USB2.0 | 0_MyLibrary:Xbox_USB_C | J1 |
| 1 | VW | 0_MyLibrary:Xbox_SwitchContactPad | SW4 |
| 1 | WHITE | LED_SMD:LED_0805_2012Metric | D19 |
| 1 | X | 0_MyLibrary:Xbox_SwitchContactPad | SW7 |
| 1 | Y | 0_MyLibrary:Xbox_SwitchContactPad | SW8 |
| 1 | ~ | 0_MyLibrary:Xbox_R_01005_0402Metric | R?6 |
More from MartinChauveliere/Xbox_Controller_PCB
2- 4 layers37.4 × 21.8 mm
SOC Board
MartinChauveliere/Xbox_Controller_PCB
Replication des PCB d'une manette Xbox modèle 1914
162 parts
Similar boards
- 2 layers60 × 60 mm
HighPower Mechaduino
pointhi/HighPower-Mechaduino
Mechaduino derivative which drives up to 10A, drawn using KiCad
140 parts31 - 4 layers161 × 100 mm
- 4 layers60 × 85 mm
VehicleVCU PCB
nsm81/VehicleVCU_PCB
A Vehicle Control Unit provides multiple CANBUS transceivers for communication within a vehicle.
86 parts1 - 4 layers160 × 100 mm
OSM env01
devtank-ltd/kicad_osm_env01
This documentation describes Open Hardware and is Licensed under CERN-OHL-W v2.
243 parts - 2 layers50 × 56 mm
- 2 layers90 × 40 mm
- 4 layers89 × 137 mm
- 4 layers25.4 × 12.7 mm
Morphwatch
ccadic/The603-200
One of the most strange Vintage Connected Watch project - 192 LED and ESP32
211 parts110Apache-2.0
Questions
How big is the POWER BUTTON Board PCB?
It measures 91.8 × 66.4 mm and has 4 copper layers, 1.6 mm thick.
What parts does the POWER BUTTON Board use?
211 parts, built around the MP1476LGTF and SSM3J328R,LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the POWER BUTTON Board KiCad files?
From the MartinChauveliere/Xbox_Controller_PCB repository on GitHub, at the commit this page was made from: the board is POWER-BUTTON_Board/POWER-BUTTON_Board.kicad_pcb and its schematic MCU_Board/MCU_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the POWER BUTTON Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask MartinChauveliere before reusing the design.