

MIOT Relay Switch V1.0
PCB design for the MIOT relays
- Size
- 85.8 × 52 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 47
- Nets
- 36
- Pads
- 135
- Tracks, vias
- 436, 120
- Pours
- 114
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Apr 2026
- Updated
- 19 Aug 2026
Overview
MIOT Relay Switch V1.0 is an open-source printed circuit board by Marinus343, from the Marinus343/MIOT-Relay-Switch-HW repository on GitHub. It is a 2-layer board of 85.8 × 52 mm with 47 parts on 36 nets, routed with 436 tracks and 120 vias.
It is built around the MAX485ED, L7805 and BC547. Its parts include 11 resistors, 11 connectors, 8 diodes, 4 transistors and 4 switches. It belongs with the home automation and IoT boards and the PIC boards of this library.
Main components
3MAX485ED
SOP-8-40℃~+85℃ 1 1 1mA 32 4.75V~5.25V 5Mbps Half-Duplex Transceiver ±8kV SOP-8 RS-485 / RS-422 ICs ROHSHTCRS-485 / RS-422 ICsL7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
Parts
47| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | B | mfootprint:pad4x6 | J25, J25, J25, J25, J25, J25 |
| 5 | 10K | Resistor_SMD:R_0603_1608Metric | R3, R8, R9, R10, R11 |
| 4 | 1N4007 | Diode_SMD:D_SOD-323 | D5, D6, D7, D8 |
| 4 | 330R | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R7 |
| 4 | BC547 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q2, Q3, Q4 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 4 | SILxx-1Cxx-51x | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2, K3, K4 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 0.1uF/25V | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 0.33uF/25V | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 12V | mfootprint:pad4x6 | J17 |
| 1 | A | mfootprint:pad4x6 | J13 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | Conn_01x12_Socket | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-15-5.08_1x15_P5.08mm_Horizontal | J2 |
| 1 | GND | mfootprint:pad4x6 | J15 |
| 1 | L7805 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | LOGO | LOGO | G*** |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H4 |
| 1 | PIC16F15323-xSL | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U2 |
Similar boards
- 2 layers96.5 × 81.3 mm

- 2 layers99.8 × 49.8 mm

- 2 layers

ATMEGA 32 1
ernest-czachorowski/Flood-Sensors-KiCad-Files
This repository contains KiCad files for my master's thesis IoT infrastructure, which includes water leak detection sensors.
74 partsMIT - 2 layers104 × 241 mm

- 2 layers109.9 × 134.6 mm

- 2 layers82 × 72.2 mm

- 2 layers94 × 70 mm

- 2 layers177.9 × 97.5 mm

Questions
How big is the MIOT Relay Switch V1.0 PCB?
It measures 85.8 × 52 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MIOT Relay Switch V1.0 use?
47 parts, built around the MAX485ED, L7805 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MIOT Relay Switch V1.0 KiCad files?
From the Marinus343/MIOT-Relay-Switch-HW repository on GitHub, at the commit this page was made from: the board is MIOT-Relay-Switch_V1.0.kicad_pcb and its schematic MIOT-Relay-Switch_V1.0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MIOT Relay Switch V1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Marinus343 before reusing the design.