2 layers
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
7 parts4.3kMIT
2 layers29.8 × 14 mm
Sixi joystick
MarginallyClever/sixi-joystick4Sixi 2 joystick firmware, STL, and PCB files
- Size
- 29.8 × 14 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 8
- Pads
- 29
- Tracks, vias
- 64, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Nov 2019
- Updated
- 19 Nov 2019
Overview
Sixi joystick is an open-source printed circuit board by MarginallyClever, from the MarginallyClever/sixi-joystick repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 29.8 × 14 mm with 7 parts on 8 nets, routed with 64 tracks and 0 vias.
It belongs with the keyboards and input boards of this library.
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x03_Male | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J0, J1, J2, J3, J4, J5 |
| 1 | Conn_01x11_Male | Pin_Headers:Pin_Header_Straight_1x11_Pitch2.54mm | J6 |
Similar boards
- 2 layers40 × 20 mm
- 2 layers19.8 × 30 mm
- 2 layers35.6 × 58.2 mm
Display Carrier
AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power
7 parts1.7kGPL-3.0 - 2 layers20.3 × 16.3 mm
- 2 layers26 × 44 mm
Compact carrier board
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
7 parts1.1k - 2 layers26.4 × 53.8 mm
Atari pickup
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
7 parts1kGPL-3.0 - 2 layers
Questions
How big is the Sixi joystick PCB?
It measures 29.8 × 14 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sixi joystick use?
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sixi joystick KiCad files?
From the MarginallyClever/sixi-joystick repository on GitHub, at the commit this page was made from: the board is sixi-joystick/sixi-joystick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sixi joystick design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).