Skip to the content
2 layers53 × 35 mmTransformer less Power Supply, the printed circuit board in 3D

Transformer less Power Supply

Manideep136/Transformer-less-Power-Supply

This project is a Transformerless Power Supply (TLS) designed as a compact and low-cost AC-to-DC power supply circuit for low-power electronic applications.

Size
53 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
9
Pads
37
Tracks, vias
52, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
20 Sep 2026
Updated
20 Sep 2026

Overview

Transformer less Power Supply is an open-source printed circuit board by Manideep136, from the Manideep136/Transformer-less-Power-Supply repository on GitHub. It is a 2-layer board of 53 × 35 mm with 18 parts on 9 nets, routed with 52 tracks and 0 vias.

It is built around the L7805. Its parts include 7 diodes, 4 capacitors, 4 resistors, 2 connectors and 1 IC. It belongs with the power boards of this library.

Main components

1

README

README.md

Transformer-less-Power-Supply

📌 Project Overview

This project is a Transformerless Power Supply (TLS) designed as a compact and low-cost AC-to-DC power supply circuit for low-power electronic applications.

The PCB is designed to convert 230V AC mains supply into a low-voltage DC output without using a conventional step-down transformer.

The complete PCB was designed using KiCad, including schematic capture, PCB layout, component footprints, routing, Design Rule Check (DRC), and Gerber file generation.

⚠️ WARNING: This circuit is directly connected to AC mains. The PCB contains potentially lethal voltages. Do not touch, test, or modify the circuit while powered. This project should only be handled by someone experienced with mains-voltage electronics.


🔧 Features

  • Transformerless AC-to-DC power conversion
  • Compact PCB design
  • Low-cost component implementation
  • Designed using KiCad
  • Through-hole / SMD components depending on the final BOM
  • Rectification and voltage regulation
  • Filtering for smoother DC output
  • PCB layout optimized for compactness and electrical clearance
  • DRC checked PCB design
  • Gerber files included for PCB fabrication

⚡ Working Principle

The transformerless power supply uses a capacitive voltage-dropper circuit to reduce the current available from the 230V AC mains without using a transformer.

Basic Power Flow

text
        230V AC
           │
           ▼
   ┌─────────────────┐
   │ Current Limiting│
   │ Capacitor       │
   └────────┬────────┘
            │
            ▼
   ┌─────────────────┐
   │ Rectifier       │
   │ Bridge / Diodes │
   └────────┬────────┘
            │
            ▼
   ┌─────────────────┐
   │ Filter Capacitor│
   └────────┬────────┘
            │
            ▼
   ┌─────────────────┐
   │ Voltage         │
   │ Regulation      │
   └────────┬────────┘

Parts

18
QtyValueFootprintReferences
41N4007Diode_THT:D_A-405_P7.62mm_HorizontalD1, D2, D3, D4
220kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1, R2
2D_ZenerDiode_THT:D_A-405_P7.62mm_HorizontalD5, D6
2Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1, J2
10.1ufCapacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mmC1
11000ufCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC2
11MResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR3
12.2kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
12.2ufCapacitor_THT:C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3C4
1470ufCapacitor_THT:CP_Radial_D10.0mm_P5.00mmC3
1L7805Package_TO_SOT_THT:TO-220F-3_VerticalU1
1LEDLED_THT:LED_D5.0mmD8

Similar boards

  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers132.1 × 45.7 mmIPoS, the printed circuit board in 3D

    IPoS

    peterheinrich/InternetOverSpaghetti

    Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

    42 parts342
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers90.8 × 35.6 mmERCF easy brd, the printed circuit board in 3D

    ERCF easy brd

    Tircown/ERCF-easy-brd

    More informations on how to reset for flashing:\ https://wiki.seeedstudio.com/Seeeduino-XIAO/#enter-bootloader-mode

    28 parts195GPL-3.0
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers91.4 × 71.1 mmPico w rover, the printed circuit board in 3D

    Pico w rover

    NikodemBartnik/Mini-Mars-Rover

    Educational robotic platform made to look like a mini mars rover

    20 parts143MIT
  • 2 layers144.1 × 182.2 mmSHVC CPU-01, the printed circuit board in 3D

    SHVC CPU-01

    starlightk7/OpenSFC

    OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

    498 parts114CERN-OHL-S-2.0
  • 2 layers106.1 × 155 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Redherring32/OpenTendo-TopLoader

    An Open Source HardWare (OSHW) recreation of the 1993 toploading NES motherboard (Also known as NES-101)

    84 parts94

Questions

How big is the Transformer less Power Supply PCB?

It measures 53 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Transformer less Power Supply use?

18 parts, built around the L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Transformer less Power Supply KiCad files?

From the Manideep136/Transformer-less-Power-Supply repository on GitHub, at the commit this page was made from: the board is Transformerless power supply/Transformerless power supply.kicad_pcb and its schematic Transformerless power supply/Transformerless power supply.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Transformer less Power Supply design in my own project?

Its repository states no licence, so its author keeps all rights: ask Manideep136 before reusing the design.