
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

The BJT Astable Multivibrator is a transistor-based oscillator circuit that continuously switches between two states without using an IC.
BJT Astable multivibrator is an open-source printed circuit board by Manideep136, from the Manideep136/BJT-Astable-multivibrator repository on GitHub. It is a 2-layer board of 25.1 × 35.1 mm with 10 parts on 6 nets, routed with 44 tracks and 0 vias.
Its parts include 4 resistors, 2 capacitors, 2 diodes and 2 transistors.
The BJT Astable Multivibrator is a transistor-based oscillator circuit that continuously switches between two states without using an IC.
The circuit is built using two 2N3904 NPN transistors, two LEDs, resistors, and capacitors. The two transistor stages are cross-coupled through capacitors, causing the transistors to turn ON and OFF alternately.
As a result, the two LEDs blink alternately, demonstrating the basic principles of transistor switching, capacitor charging/discharging, feedback, and oscillation.
The complete circuit and PCB were designed using KiCad 9.0.
The main objectives of this project are:
The circuit consists of two 2N3904 NPN transistors connected in a cross-coupled configuration.
Each transistor has:
The circuit is powered by a 3.7 V DC supply.
+3.7V
│
┌─────┴─────┐
│ │
R1 R4
1 kΩ 1 kΩ
│ │
LED1 LED2
│ │
Q1 Q2
2N3904 2N3904
│ │
GND GND
Cross-Coupled
Capacitor Network
Q1 Collector
│
C1
│
Q2 Base
Q2 Collector| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1, R4 |
| 2 | 220uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | 5K | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2, R3 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 25.1 × 35.1 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Manideep136/BJT-Astable-multivibrator repository on GitHub, at the commit this page was made from: the board is BJT Astable multivibrator/BJT Astable multivibrator.kicad_pcb and its schematic BJT Astable multivibrator/BJT Astable multivibrator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Manideep136 before reusing the design.