
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

ControllerCarrier is an open-source printed circuit board by ManiacalLabs, from the ManiacalLabs/POVSaber repository on GitHub, published under the MIT licence. It is a 2-layer board of 87 × 21.6 mm with 7 parts on 48 nets, routed with 64 tracks and 0 vias.
Its parts include 3 connectors, 3 switches and 1 IC. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | SW_Push | w_switch:PCB_PUSH | SW1, SW2, SW3 |
| 1 | BATT_IN | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | J2 |
| 1 | LED_OUT | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J3 |
| 1 | OLED_128x32 | oled:OLED_128x32_i2c | J1 |
| 1 | Teensy3.6 | teensy:Teensy35_36_NoCenterPins | U1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 87 × 21.6 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ManiacalLabs/POVSaber repository on GitHub, at the commit this page was made from: the board is ControllerCarrier/ControllerCarrier.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).