

IrDA RS232
IrDA to RS232, using MCP2155, can be embedded into Modems, ISDN TAs, printers, etc.
- Size
- 62.9 × 32 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 44
- Pads
- 142
- Tracks, vias
- 284, 76
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 20 Mar 2022
- Updated
- 31 Jan 2024
Overview
IrDA RS232 is an open-source printed circuit board by Manawyrm, from the Manawyrm/IrDA_RS232 repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 62.9 × 32 mm with 41 parts on 44 nets, routed with 284 tracks and 76 vias.
It is built around the MAX232N, MCP2155-I/P and TFDU4301-TT1, with the BAV99 among its other parts. Its parts include 17 capacitors, 9 resistors, 4 ICs, 2 diodes and 1 transistor.
Main components
4MAX232N
PDIP-160℃~+70℃ 120Kbps 2 2 4.5V~5.5V Transceiver PDIP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsMCP2155-I/P
PDIP-18-40℃~+125℃ 3V~5.5V PDIP-18 IrDA Transceiver Modules ROHSMicrochip TechnologyIrDA Transceiver ModulesTFDU4301-TT1
SMD-8P,8.3x3.1mm-30℃~+85℃ 115.2Kbit/s 2.4V~5.5V 2.5mm 3.1mm 70cm 70uA 8.5mm SMD-8P,8.3x3.1mm IrDA Transceiver Modules ROHSVishay IntertechnologyIrDA Transceiver ModulesBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching Diodes
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 1uF 25V | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C12 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R7, R9 |
| 3 | 10µF | Capacitor_SMD:C_0603_1608Metric | C15, C16, C17 |
| 2 | 10R | Resistor_SMD:R_1206_3216Metric | R4, R5 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | MAX232 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 2 | MountingHole | ToolingHole:ToolingHole_JLCSMT | H1, H2 |
| 1 | 11.0592 MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 4.7R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 5V | TestPoint:TestPoint_Pad_2.0x2.0mm | TP1 |
| 1 | BAUD0 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP1 |
| 1 | BAUD1 | Jumper:SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm | JP2 |
| 1 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D2 |
| 1 | GND | TestPoint:TestPoint_Pad_2.0x2.0mm | TP2 |
| 1 | IR link | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MCP2155 | Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm | U3 |
| 1 | RS232 | Connector_Dsub:DSUB-9_Male_Vertical_P2.77x2.84mm_MountingHoles | J1 |
| 1 | TFDU4301 | TFDU4301:TFDU4301 | U4 |
Similar boards
- 2 layers100 × 60 mm

- 2 layers40 × 55 mm

- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers60.5 × 31.5 mm

Ps2-serial mouse adapter
necroware/ps2-serial-mouse-adapter
PS/2 to serial port mouse adapter
13 parts89GPL-3.0 - 2 layers79.7 × 35.1 mm

USB-2-232
LimeProgramming/USB-serial-mouse-adapter
Convert USB mouse to Serial mouse using Pi Pico
29 parts50MPL-2.0 - 2 layers148.3 × 116.6 mm

KiCAD RetroArduInput
RetroFuturisticEngineer/RetroARDUInput
Use USB Keyboards, Mice and Joysticks on PC/XT, PC/AT, Tandy 1000, Atari, Amiga, C64 and Apple
48 parts25LGPL-2.1 - 2 layers99.1 × 99.1 mm

6809v2
jbevren/6809v2
Code and design repository for the 6809v2 SBC: To be released at VCFMW 13
60 parts22 - 2 layers100 × 45 mm

Transcribe
cyberboy666/_transcribe_
midi to rs232 bridge - for performance control of old video mixers and switchers
28 parts20
Questions
How big is the IrDA RS232 PCB?
It measures 62.9 × 32 mm and has 4 copper layers, 1.6 mm thick.
What parts does the IrDA RS232 use?
41 parts, built around the MAX232N, MCP2155-I/P, TFDU4301-TT1 and BAV99. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the IrDA RS232 KiCad files?
From the Manawyrm/IrDA_RS232 repository on GitHub, at the commit this page was made from: the board is IrDA_RS232.kicad_pcb and its schematic IrDA_RS232.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the IrDA RS232 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).