2 layers
Power driver
MakerMylo/Embroiderino
Forked from an old gitlab repo to hold on to forever.
24 parts1GPL-3.0
2 layers
Encoder
MakerMylo/Embroiderino1Forked from an old gitlab repo to hold on to forever.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 5
- Pads
- 22
- Tracks, vias
- 51, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 8 Nov 2024
- Updated
- 8 Nov 2024
Overview
Encoder is an open-source printed circuit board by MakerMylo, from the MakerMylo/Embroiderino repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 11 parts on 5 nets, routed with 51 tracks and 0 vias.
Its parts include 3 resistors, 2 capacitors, 2 transistors, 1 diode and 1 connector.
README
README.mdEmbroiderino
Embroiderino is a test project which aims at providing all needed to turn an ordinary sewing machine into digital embroidery machine or at least to reuse any other embroidery machine with mainboard failure. Most of the mechanical parts are intended to be made on 3D printer.
As an electronics, arduio based 3D printer board is tested, with additional encoders connected to it. This will do job for now too. As a firmware teathimble is in development. For hoop positioning this plotter is adopted. All mechanics parts and sewing machine itself are mounted to chipboard.
Client application is written in python3 and TK, it can open CSV's created by Embroidermodder2.
Work in progress
Note that this is early stage development. Machine, main DC motor speed controller is a next milestone. All the code is licensed under GPL v3.
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100n | Capacitors_ThroughHole:C_Disc_D3_P2.5 | C1, C2 |
| 2 | 10K | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R2 |
| 2 | OPTO_NPN | Capacitors_ThroughHole:C_Disc_D3_P2.5 | Q1, Q2 |
| 1 | 550R | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R3 |
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04 | P1 |
| 1 | LED | Capacitors_ThroughHole:C_Rect_L4_W2.5_P2.5 | D1 |
The 9 most common of 11 parts.
More from MakerMylo/Embroiderino
1Similar boards
- 2 layers60 × 30 mm
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
11 parts3kApache-2.0 - 2 layers103 × 30.5 mm
- 2 layers26 × 30 mm
Expansion Card
FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop
11 parts1.1kCC-BY-4.0 - 2 layers53.9 × 23.2 mm
Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
11 parts1kGPL-3.0 - 2 layers10 × 20 mm
2 connector Sensor Board
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
11 parts915 - 2 layers
- 2 layers47 × 33 mm
Sevensegment led display module
tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!
11 parts803MIT - 2 layers42.5 × 36.8 mm
Devboard
basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
11 parts743CC-BY-4.0
Questions
What parts does the Encoder use?
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Encoder KiCad files?
From the MakerMylo/Embroiderino repository on GitHub, at the commit this page was made from: the board is electronics/encoder/encoder.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Encoder design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).