

Portable Voltage Standard
Portable voltage reference module, based on the REF7050 chip from Ti
- Size
- 79.5 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 21
- Pads
- 105
- Tracks, vias
- 127, 44
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 19 Jan 2025
- Updated
- 10 Oct 2025
Overview
Portable Voltage Standard is an open-source printed circuit board by MPlasson, from the MPlasson/Portable-Voltage-Standard repository on GitHub, published under the MIT licence. It is a 2-layer board of 79.5 × 60 mm with 49 parts on 21 nets, routed with 127 tracks and 44 vias.
It is built around the NCS333SN2, AP2302B and AP2301B, with the K14 among its other parts. Its parts include 12 resistors, 8 capacitors, 3 ICs, 3 diodes and 3 transistors.
Main components
4NCS333SN2
TSOP-5-40℃~+105℃ 0.1V/us 1 1.8V~5.5V 123dB 17uA 3.5uV 30nV/℃ 350kHz 50pA 5mA 60pA 62nV/√Hz@1kHz EMI filtering/RF suppression、Zero drift / auto-zero Rail-to-Rail Input, Rail-to-Rail Output TSOP-5 Precision Op Amps ROHSonsemiPrecision Op AmpsAP2302B
SOT-23-55℃~+150℃ 1 N-channel 1.2V 120pF 2.8A 20V 300pF 350mW 4nC@4.5V 70mΩ@2.5V 80pF N-Channel ±10V SOT-23 MOSFETs ROHSALLPOWERMOSFETsAP2301B
SOT-23-55℃~+150℃ 1 P-Channel 160mΩ@4.5V 20V 210pF 27pF 2A 750mW 950mV P-Channel SOT-23 MOSFETs ROHSALLPOWERMOSFETsK14
SOD-123FL-65℃~+125℃ 1A 200uA@40V 30A 40V 550mV@1A Independent SOD-123FL Schottky Diodes ROHSGOODWORKSchottky Diodes
README
README.mdPortable Voltage Standard
A portable voltage reference module, based on the REF7050 chip from Ti.

Features
- Stable 5V output with high accuracy (< 0.025%)
- Very low temperature coefficient (< 2ppm/°C)
- Battery powered for lowest noise & portability
- Power Good LED indicator
- Low Battery LED indicator
Tests status
Link to test report: TestReport
- Initial bringup
- Line regulation
- Load regulation
- Current consumption
- Low battery LED trigger voltage
- Ambient temperature accuracy
- Temperature drift [20°C - 50°C]
- Output stability (100h minimum)
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H3, H3, H4, H5, H6 |
| 4 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2, C5, C6 |
| 3 | 100 | Resistor_SMD:R_0603_1608Metric | R7, R11, R12 |
| 2 | 1Meg | Resistor_SMD:R_0603_1608Metric | R4, R10 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R8, R9 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C3, C7 |
| 2 | 300k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | AP2302B | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | NetTie_2 | NetTie:NetTie-2_SMD_Pad0.5mm | NT1, NT2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_5x5.3 | C4 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 470k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 9V_Battery | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | BT1 |
| 1 | AP2301B | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | AUX_POWER | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal | J4 |
| 1 | G*** | kibuzzard-678D07AC | kibuzzard-678D07AC |
| 1 | G*** | kibuzzard-678D0B69 | kibuzzard-678D0B69 |
| 1 | G*** | kibuzzard-678D0758 | kibuzzard-678D0758 |
| 1 | G*** | kibuzzard-678D073D | kibuzzard-678D073D |
| 1 | G*** | kibuzzard-678D0795 | kibuzzard-678D0795 |
| 1 | GND | KICAD_GENERAL_LIBRARY:banana_socket_24.245.2_Amass_noire | J3 |
| 1 | K14 | Diode_SMD:D_SOD-123F | D1 |
| 1 | LM4040DBZ-2.5 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | LOW_VOLTAGE | LED_THT:LED_D5.0mm | D2 |
| 1 | NCS333 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | OUTF | KICAD_GENERAL_LIBRARY:banana_socket_24.245.1_Amass_rouge | J1 |
| 1 | POWER_GOOD | LED_THT:LED_D5.0mm | D3 |
| 1 | REF7050 | Package_LCC:Analog_LCC-8_5x5mm_P1.27mm | U1 |
| 1 | SW_Push_SPDT | KICAD_GENERAL_LIBRARY:SPEF210200 | SW1 |
Similar boards
- 2 layers50 × 70 mm

- 2 layers41 × 20.3 mm

- 2 layers109 × 71 mm

- 2 layers298.8 × 122 mm

Ursaminor pcb
markstory/ursa-minor-keyboard
Design and schematics for the ursaminor keyboard
225 parts23 - 4 layers114.9 × 129.9 mm

Tanmatsu
Nicolai-Electronics/tanmatsu-hardware
Hardware design of the Tanmatsu mainboard
372 parts9CERN-OHL-P-2.0 - 2 layers76.2 × 76.2 mm

- 2 layers90.4 × 114 mm

Hh2024
badgeteam/hackerhotel-2024-hardware
Conference badge for Hackerhotel 2024
119 parts3CERN-OHL-P-2.0 - 2 layers285 × 116 mm

Questions
How big is the Portable Voltage Standard PCB?
It measures 79.5 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Portable Voltage Standard use?
49 parts, built around the NCS333SN2, AP2302B, AP2301B and K14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Portable Voltage Standard KiCad files?
From the MPlasson/Portable-Voltage-Standard repository on GitHub, at the commit this page was made from: the board is electronics/mainboard/PortableVoltageStandard.kicad_pcb and its schematic electronics/front_panel/PVS_FrontPanel/PVS_FrontPanel.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Portable Voltage Standard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).