
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

Breakout board for ATSAML21Gxx MCU
SAML BreakoutBoard is an open-source printed circuit board by MPlasson, from the MPlasson/ATSAML21G_Breakout repository on GitHub. It is a 2-layer board of 20.4 × 54.4 mm with 10 parts on 42 nets, routed with 221 tracks and 11 vias.
Its parts include 4 capacitors, 3 connectors, 1 resistor, 1 IC and 1 switch. It belongs with the microcontroller boards boards and the SAM D and SAM boards of this library.
Breakout board for ATSAML21Gxx MCU
Now available on PCBS.io (sharing link): https://pcbs.io/share/rG9PZ
Bill of materials (BOM):
| Designator | Value | Package description |
|---|---|---|
| R1 | 10k | 0805 |
| C1 | 100nF | 0805 |
| C2 | 1µF | 0805 |
| C3 | 100nF | 0805 |
| C4 | 1µF | 0805 |
| J1 | 21 pins | 0.1"/2.54mm header |
| J2 | 20 pins | 0.1"/2.54mm header |
| J3 | 5 pins | 0.1"/2.54mm header - JTAG connector |
| SW1 | K2-1107ST | Switch from LCSC.com |
| U1 | ATSAML21Gxx | MCU in LQFP48 package |
Here is the board once assembled:

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | Capacitors_SMD:C_0805 | C1, C3 |
| 2 | 1µF | Capacitors_SMD:C_0805 | C2, C4 |
| 1 | 10k | Resistors_SMD:R_0805 | R1 |
| 1 | ATSAML21G17B-AUT | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | Conn_01x20 | Pin_Headers:Pin_Header_Straight_1x20_Pitch2.54mm | J2 |
| 1 | Conn_01x21 | Pin_Headers:Pin_Header_Straight_1x21_Pitch2.54mm | J1 |
| 1 | JTAG | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | J3 |
| 1 | K2-1107ST | SAML_BreakoutBoard:SW_SPST_K2-1107ST | SW1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch


OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

rusefi/rusefi
rusefi - GPL internal combustion engine control unit

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 20.4 × 54.4 mm and has 2 copper layers, 1.6 mm thick.
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the MPlasson/ATSAML21G_Breakout repository on GitHub, at the commit this page was made from: the board is SAML_BreakoutBoard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask MPlasson before reusing the design.