4 layers68.6 × 53.3 mm
Icezum
FPGAwars/icezum
:star2: IceZUM Alhambra: an Arduino-like Open FPGA electronic board
218 parts357GPL-3.0
2 layers33.8 × 30.7 mm
Programmer
ME-IRL/JTAG-RS232-Programmer- Size
- 33.8 × 30.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 56
- Pads
- 178
- Tracks, vias
- 320, 37
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jan 2020
- Updated
- 11 Jan 2020
Overview
Programmer is an open-source printed circuit board by ME-IRL, from the ME-IRL/JTAG-RS232-Programmer repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 33.8 × 30.7 mm with 40 parts on 56 nets, routed with 320 tracks and 37 vias.
It is built around the FT2232HL. Its parts include 17 capacitors, 11 resistors, 3 ICs, 3 diodes and 3 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C4, C6, C10, C11, C12, C13, C14, C15, C16, C17 |
| 3 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R2, R6 |
| 3 | 120 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11 |
| 3 | LED | Diode_SMD:D_0805_2012Metric | D1, D2, D3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C1, C2 |
| 2 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C5, C7 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 12MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 2.2k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 3.3uF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 93LCxxC | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | FT2232H | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | NCP1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
The 38 most common of 40 parts.
Similar boards
- 4 layers160 × 100 mm
Rosco m68k
rosco-m68k/rosco_m68k
Design, documentation and software for the Really Old School Computer (M68K)
140 parts200 - 4 layers44 × 64 mm
JTAGProgrammer
anthony-bernaert/ftdi-jtag-programmer
FTDI-based JTAG Programmer Circuit for FPGAs
122 parts77CERN-OHL-P-2.0 - 2 layers38 × 20.7 mm
JTAG HW
vanbwodonk/ft2232hl-jtag-clone
Digilent JTAG clone hardware + eeprom firmware (.bin)
38 parts73 - 4 layers100 × 180 mm
- 4 layers165 × 107 mm
- 4 layers50 × 22.9 mm
- 2 layers100 × 100 mm
Questions
How big is the Programmer PCB?
It measures 33.8 × 30.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Programmer use?
40 parts, built around the FT2232HL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Programmer KiCad files?
From the ME-IRL/JTAG-RS232-Programmer repository on GitHub, at the commit this page was made from: the board is Programmer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Programmer design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).