Skip to the content
2 layers65.5 × 31.5 mmDevSnapLock, the printed circuit board in 3D

Repository for uploading ignition system information

Size
65.5 × 31.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
9
Pads
39
Tracks, vias
82, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
7 Nov 2023
Updated
2 Jun 2024

Overview

DevSnapLock is an open-source printed circuit board by MBI-Ignitions, from the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65.5 × 31.5 mm with 19 parts on 9 nets, routed with 82 tracks and 0 vias.

Its parts include 8 connectors, 5 diodes, 3 resistors, 2 capacitors and 1 transistor.

README

README.md

Motorized Bike Ignition Systems by MBI

Welcome to the Motorized Bike Ignition Systems (MBI) repository! This open-source project aims to provide a comprehensive solution for motorized bike enthusiasts, offering a reliable and customizable ignition system.

Table of Contents

Introduction

Motorized Bike Ignition Systems (MBI) is an open-source project focused on developing high-quality ignition systems for motorized bikes. Our goal is the development of new CDI technology, tools for evaulating them, and providing open and closed source CDIs for motorized bike engines.

Features

  • Reliability: MBI ignition systems are designed for reliability, we overspec all parts and vet most of our designs before release for reliability.
  • Customization: The project seeks to make it easy to custimize and modify the open-source designs for your own engines needs.
  • Compatibility: Our ignitions are a drop in replacement for almost all stock motorized bike engines that use a standard magneto and magnet.
  • Open Source: The entire project is open source, encouraging collaboration and innovation within the motorized bike community.

Acquiring

There are a few ways you can go about acquiring a CDI. You can:

  • Order your own boards (minimum of 5), components and equipment, then build them yourself. This is the cheapest option for small batches.
  • Order your boards from an approved seller in your desired quantity, order components and equipment then build them yourself. This is cheaper for single board runs.
  • Purchase a board and component kit (COMING SOON).
  • Purchase a completed board. This is the easiest to get running out of the box.

Updates

Since this is an open-source passion project, we are adding information when we find time to. The wiki will start to get more and more information as we build more testing equipment and gather more knowledge from the community. If you think that there's more to add then consider becoming a contributor or donating to the project!

License

This project is licensed under the GPLv3 License. Feel free to use, modify, and distribute the designs in accordance with the terms outlined in the license.

Donate

If you find this information helpful then consider contributing to the project! All donations go towards contributing to this repo and developing open source devices to add.

Buy Me A Coffee

Contact

If have any questions then feel free to message us on facebook at Mbi Ignitions, or email us here

Parts

19
QtyValueFootprintReferences
51N4007Diode_THT:D_DO-41_SOD81_P7.62mm_HorizontalD1, D2, D3, D4, D5
10.47uCapacitor_THT:CP_Radial_Tantal_D5.5mm_P2.50mmC2
116Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR2
11uCapacitor_THT:C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4C1
147Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1680Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR8
1AtGTE_1792863:TE_1792863J4
1COILConnector_Wire:SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mmJ2
1GtDTE_1792863:TE_1792863J3
1MAGConnector_Wire:SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mmJ1
1TIC106Package_TO_SOT_THT:TO-220-3_VerticalQ1
1aCTE_1792863:TE_1792863J8
1aDTE_1792863:TE_1792863J7
1lDTE_1792863:TE_1792863J6
1scrDTE_1792863:TE_1792863J5

More from MBI-Ignitions/MBI_Ignition_Systems

11
  • 2 layers68.6 × 53.3 mmUnoShield, the printed circuit board in 3D

    UnoShield

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    56 parts7GPL-3.0
  • 2 layers68.6 × 55.9 mmMk2.1CDI, the printed circuit board in 3D

    Mk2.1CDI

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    32 parts7GPL-3.0
  • 2 layers68.6 × 55.9 mmMk2.2CDI, the printed circuit board in 3D

    Mk2.2CDI

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    27 parts7GPL-3.0
  • 2 layers38.9 × 47.2 mmRohmell, the printed circuit board in 3D

    Rohmell

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    27 parts7GPL-3.0
  • 2 layers68.6 × 55.9 mmMk1CDI, the printed circuit board in 3D

    Mk1CDI

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    26 parts7GPL-3.0
  • 2 layers49.8 × 23.4 mmBaker, the printed circuit board in 3D

    Baker

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    26 parts7GPL-3.0
  • 2 layers52.6 × 31 mmDevPot v2, the printed circuit board in 3D

    DevPot v2

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    26 parts7GPL-3.0
  • 2 layers31.6 × 28.1 mmMk2.2SMD, the printed circuit board in 3D

    Mk2.2SMD

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    24 parts7GPL-3.0
  • 2 layers52.7 × 31.1 mmMk1CDIs, the printed circuit board in 3D

    Mk1CDIs

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    23 parts7GPL-3.0
  • 2 layers45.2 × 32 mmJaguar, the printed circuit board in 3D

    Jaguar

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    22 parts7GPL-3.0
  • 2 layers45 × 31 mmDevPot, the printed circuit board in 3D

    DevPot

    MBI-Ignitions/MBI_Ignition_Systems

    Repository for uploading ignition system information

    21 parts7GPL-3.0

Similar boards

  • 2 layers43.9 × 27.7 mmTcd1304-4v, the printed circuit board in 3D

    Tcd1304-4v

    OpnTec/open-spectrometer-hardware

    Open source VIS spectrometer

    19 parts1.5k
  • 2 layers50 × 60 mmDebate Device, the printed circuit board in 3D

    Debate Device

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    19 parts915
  • 2 layers102.9 × 96.7 mmISA adapter, the printed circuit board in 3D

    ISA adapter

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    19 parts805
  • 2 layers60 × 39 mmPs2usb, the printed circuit board in 3D

    Ps2usb

    rasteri/HIDman

    Adapting USB devices to work on old computers

    19 parts432
  • 2 layers70.1 × 43.2 mmIaq device, the printed circuit board in 3D

    Iaq device

    nkitanov/iaq_board

    IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

    19 parts396
  • 2 layers80 × 80 mmGB BRK CPU G1, the printed circuit board in 3D

    GB BRK CPU G1

    Gekkio/gb-hardware

    Game Boy -related custom hardware by gekkio

    19 parts379CC-BY-4.0
  • 2 layers25.4 × 25.4 mmIna169, the printed circuit board in 3D

    Ina169

    Ardumower/ardumower

    Develop an open source robotic lawn mower (HW+SW reference platform)

    19 parts282
  • 2 layers58.4 × 28.6 mmNew rele, the printed circuit board in 3D

    New rele

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    19 parts269

Questions

How big is the DevSnapLock PCB?

It measures 65.5 × 31.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the DevSnapLock use?

19 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the DevSnapLock KiCad files?

From the MBI-Ignitions/MBI_Ignition_Systems repository on GitHub, at the commit this page was made from: the board is Open Source CDIs/DevSnapLock/DevSnapLock.kicad_pcb and its schematic Archive/Mk1/Mk1 SMD/Mk1CDIs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the DevSnapLock design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).