
Panel PanelPCBkicad pro
M-Scholli/BugWiper2_0
Bug Wiper Controller for Sailplanes Version 2 with ESP32-S3

Bug Wiper Controller for Sailplanes Version 2 with ESP32-S3
BugWiperPCB is an open-source printed circuit board by M-Scholli, from the M-Scholli/BugWiper2_0 repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 110 × 40 mm with 115 parts on 101 nets, routed with 988 tracks and 438 vias.
It is built around the ESP32-S3-WROOM-1-N8, BTN9960LV and D5V0P4UR6SO, with the PTS120630V012, 54602-908LF and B2B-XH-AM(LF)(SN) among its other parts. Its parts include 41 capacitors, 24 resistors, 8 connectors, 6 ICs and 4 fuses. It belongs with the ESP32 boards of this library.

The new version of the BugWiper system is a complete redesign of the hardware and software to improve the performance, reliability and features of the system. The new design is based on the ESP32-S3 micro controller. The new design also includes a new motor with higher torque, a self locking gear and a motor encoder to measure the motor position and speed. The new design also includes a new software architecture that allows for more advanced features like programmable cable length, soft direction change of the motor at the wingtip, slow down the motor before reaching the fuselage and logging of all sensor data on an SD-card for later analysis and optimization of the system.

The BugWiper System cleans the wings in around 30 seconds as shown in this graph:

The documentation of the new version is still in progress, but you can already find some information about the hardware and software design in the following documents: Documentation
The user manual can be found here: User Manual
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 100nF | BugWiper_lib:C_0603_1608Metric | C3, C22, C27, C29, C30, C31, C36, C39 |
| 7 | 10k | BugWiper_lib:R_0603_1608Metric | R6, R10, R11, R18, R21, R22, R38 |
| 6 | 1k | BugWiper_lib:R_0603_1608Metric | R9, R12, R13, R14, R15, R27 |
| 5 | 10nF | BugWiper_lib:C_0603_1608Metric | C14, C32, C33, C34, C35 |
| 5 | 1nF | BugWiper_lib:C_0603_1608Metric | C11, C12, C13, C37, C38 |
| 5 | 22uF | BugWiper_lib:C_1210_3225Metric | C15, C16, C17, C21, C23 |
| 5 | 22uF | BugWiper_lib:C_1206_3216Metric | C7, C10, C24, C25, C26 |
| 4 | 330uF | BugWiper_lib:CP_Elec_8x10.5 | C18, C19, C20, C28 |
| 4 | D5V0P4UR6 | BugWiper_lib:SOT26_DIO | CR1, CR2, CR3, CR4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H3, H4, locked |
| 4 | PTS120630V012 | BugWiper_lib:R_1206_3216Metric | F1, F2, F3, F4 |
| 3 | 1uF | BugWiper_lib:C_0805_2012Metric | C5, C9, C40 |
| 3 | 22k | BugWiper_lib:R_0603_1608Metric | R7, R8, R20 |
| 3 | 4x100R | BugWiper_lib:RESCAV80P320X155X60-8N | RN3, RN6, RN7 |
| 3 | 4x1k | BugWiper_lib:RESCAV80P320X155X60-8N | RN1, RN2, RN5 |
| 2 | 22 | BugWiper_lib:R_0603_1608Metric | R4, R5 |
| 2 | 22p | BugWiper_lib:C_0603_1608Metric | C1, C2 |
| 2 | 4x10k | BugWiper_lib:RESCAV80P320X155X60-8N | RN4, RN8 |
| 2 | 5k1 | BugWiper_lib:R_0603_1608Metric | R2, R3 |
| 2 | BTN9960LV | BugWiper_lib:IFX-PG-HSOF-7-1-V | U2, U3 |
| 2 | Bridged 12 | BugWiper_lib:SolderJumper_2P_R_SMD_0603_Bridged | JP2, JP3 |
| 2 | C | BugWiper_lib:C_0603_1608Metric | C6, C8 |
| 2 | SW_Push | BugWiper_lib:EVQ9P701P | SW1, SW2 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP5, JP6 |
| 2 | ~ | BugWiper_lib:R_0603_1608Metric | R16, R17 |
| 1 | 104031-0811 | BugWiper_lib:microSD_HC_Molex_104031-0811 | J8 |
| 1 | 10k NTC | BugWiper_lib:R_0603_1608Metric | TH1 |
| 1 | 10uH 2.2A 74477410 | BugWiper_lib:WE-PD2_5848 | L2 |
| 1 | 1770924 | BugWiper_lib:CONN_1814537 | J2 |
| 1 | 1776508 | BugWiper_lib:PHOENIX_1776508 | J3 |
| 1 | 1824420000 | BugWiper_lib:SHDR4W80P700X350_2X2_770X1400X850P | J6 |
| 1 | 1nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C41 |
| 1 | 3k3 | BugWiper_lib:R_0603_1608Metric | R19 |
| 1 | 470nF | BugWiper_lib:C_0603_1608Metric | C4 |
| 1 | 54602-908LF | BugWiper_lib:CONN8_2-908LF_AMP | J4 |
| 1 | AP7333-33SRG-7 | BugWiper_lib:SOT23R_DIO | U7 |
| 1 | B2B-XH-AM(LF)(SN) | BugWiper_lib:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical | J7 |
| 1 | Conn_TagConnect_TC2030-NL_ESP_Prog | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J5 |
| 1 | D_TVS 14V | BugWiper_lib:D_SMB | D3 |
| 1 | ESP32-S3-WROOM-1 | BugWiper_lib:ESP32-S3-WROOM-1 | U1 |
| 1 | GDZ10B | BugWiper_lib:D_SOD-323_HandSoldering | D2 |
| 1 | IHLP4040DZER100M11 | BugWiper_lib:IND_IHLP-4040DZ_VIS | L1 |
| 1 | INA180A2 | BugWiper_lib:SOT-23-5 | U4 |
| 1 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H5 |
| 1 | R004 | BugWiper_lib:R_1210_3225Metric | R25 |
| 1 | SQJ146ELP | BugWiper_lib:PowerPAK_SO-8L_3_VIS | Q1 |
| 1 | SolderJumper_0R_0603 | BugWiper_lib:SolderJumper_R_SMD_0603 | JP1 |
| 1 | SolderJumper_3_Bridged12 | BugWiper_lib:SolderJumper_3P_R_SMD_0603_Bridged_12 | JP4 |
| 1 | TSR 0.5-2433 | BugWiper_lib:TSR0P5_TRP | U6 |
| 1 | UJ20-C-H-G-SMT-1-P16-TR | BugWiper_lib:SAMESKY_UJ20-C-H-G-SMT-1-P16-TR | J1 |
| 1 | locked | BugWiper_lib:D_SOD-323_HandSoldering | D1 |

M-Scholli/BugWiper2_0
Bug Wiper Controller for Sailplanes Version 2 with ESP32-S3

M-Scholli/BugWiper2_0
Bug Wiper Controller for Sailplanes Version 2 with ESP32-S3

M-Scholli/BugWiper2_0
Bug Wiper Controller for Sailplanes Version 2 with ESP32-S3

KLFAMO/current3x3A_Artiq
3 channel current driver (up to 3A each channel) compatible with Artiq


SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics





CaseyRasor/custom_esp32_screen_header
Custom ESP32 PCB with screen header for 4" tft display and gpio headers
It measures 110 × 40 mm and has 4 copper layers, 1.6 mm thick.
115 parts, built around the ESP32-S3-WROOM-1-N8, BTN9960LV, D5V0P4UR6SO and PTS120630V012. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the M-Scholli/BugWiper2_0 repository on GitHub, at the commit this page was made from: the board is Hardware/ControllerPCB/BugWiperPCB.kicad_pcb and its schematic Hardware/ControllerPCB/BugWiperPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).