

Wardriver PCB
The Cute ESP32 Pocket Wardriver! Based on the Xiao / QT-Py boards.
- Size
- 39 × 63 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 21
- Pads
- 94
- Tracks, vias
- 212, 22
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 30 Oct 2023
- Updated
- 28 Jan 2024
Overview
Wardriver PCB is an open-source printed circuit board by LyndLabs, from the LyndLabs/Cutie-Wardriver repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 63 mm with 40 parts on 21 nets, routed with 212 tracks and 22 vias.
Its parts include 6 connectors, 5 switches and 3 ICs. It belongs with the ESP32 boards of this library.
README
README.mdCutie Wardriver ❤️📡
The cute ESP32-based pocket wardriver!
Features:
- Xiao / QT-Py compatible
- SH1106 OLED
- MicroSD Card
- LiPo Battery (charging + meter)
- Qwiic Connector
Firmware:
More docs coming soon. Check out the official firmware repo!
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G***, G*** +3 |
| 3 | , , | ||
| 2 | Qwiic Connector | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3, J3 |
| 1 | clipboard:2d2d1c66-76f1-4941-9572-424b0f1f1b1a | ||
| 1 | ATGM336H | Wardriver-Footprints:ATGM336H-GPS | U2 |
| 1 | Conn_01x02_Female | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x05_Female | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left | J6 |
| 1 | Down | Wardriver-Footprints:Smol | SW4 |
| 1 | Left | Wardriver-Footprints:Smol | SW2 |
| 1 | MICRO-SD CARD | Wardriver-Footprints:MicroSD | J1 |
| 1 | Right | Wardriver-Footprints:Smol | SW3 |
| 1 | SH1106 | Nugget-Modules:SH1106 | J4 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPDT_PCM12 | SW5 |
| 1 | Up | Wardriver-Footprints:Smol | SW1 |
| 1 | XIAO ESP32-S2 | Wardriver-Footprints:MOUDLE14P-SMD-2.54-21X17.8MM | U1 |
| 1 | ~ | PicoCharge:MiniMeter | U4 |
The 37 most common of 40 parts.
Similar boards
- 2 layers139.7 × 73.7 mm

- 2 layers149.4 × 177.4 mm

Lightsculpture
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
40 parts915 - 2 layers150 × 50 mm

EleLab v2 Bus150
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
40 parts531GPL-3.0 - 2 layers66.4 × 48.1 mm

Raspberry
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
40 parts456 - 2 layers44 × 44 mm

- 2 layers90.8 × 53.3 mm

- 2 layers59.6 × 109.5 mm

Drop
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
40 parts410 - 2 layers123.8 × 73.5 mm

Questions
How big is the Wardriver PCB PCB?
It measures 39 × 63 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wardriver PCB use?
40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wardriver PCB KiCad files?
From the LyndLabs/Cutie-Wardriver repository on GitHub, at the commit this page was made from: the board is Cutie-Wardriver-PCB/PCB/Wardriver-PCB.kicad_pcb and its schematic Cutie-Wardriver-PCB/PCB/Wardriver-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wardriver PCB design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).