2 layers110.7 × 109.2 mm
ESP32S3R8 XR GL
Supriya648/ESP32-S3-XR-Glasses-PCB
Custom PCB with ESP32-S3 camera module for AI/XR glasses
80 parts
4 layers100 × 70 mm
Cherrycam
LucasHT22/lucamI love cameras. why not make my own?
- Size
- 100 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 55
- Nets
- 185
- Pads
- 388
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 26 Jun 2026
- Updated
- 23 Jul 2026
Overview
Cherrycam is an open-source printed circuit board by LucasHT22, from the LucasHT22/lucam repository on GitHub. It is a 4-layer board of 100 × 70 mm with 55 parts on 185 nets.
It is built around the W25Q128JVSIQ, AP2112K-1.8 and AP2112K-3.3, with the MIC5504-2.8YM5-TR, USBLC6-2SC6 and BSS138 among its other parts. Its parts include 15 resistors, 7 connectors, 5 ICs, 3 capacitors and 2 diodes.
Main components
6
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AP2112K-1.8
SOT251.8V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedMIC5504-2.8YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 160mV@(300mA) 175uVrms 2.8V 300mA 38uA 5.5V 60dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
BSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETs
README
README.mdlucam
I love cameras. why not make my own?
Parts
55| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric | C_CAM1, C_CAM3, C3, C6, C9, C11, C12, C13, C15 |
| 7 | 10µF | Capacitor_SMD:C_0402_1005Metric | C_CAM2, C_CAM4, C2, C5, C8, C10, C14 |
| 6 | R | Resistor_SMD:R_0402_1005Metric | R7, R8, R9, R10, R11, R12 |
| 4 | MountingHole_3.2mm_M3_ISO7380_Pad | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | REF1, REF2, REF3, REF5 |
| 3 | 1µF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C7 |
| 2 | 330Ω | Resistor_SMD:R_0402_1005Metric | R14, R15 |
| 2 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 47Ω | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | DF40C-100DS-0.4V_51_ | Connector_Hirose_DF40:Hirose_DF40C-100DS-0.4V_2x50_P0.4mm | J1, J2 |
| 2 | LED | LED_SMD:LED_0402_1005Metric | D1, D2 |
| 1 | 10kΩ | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | AP2112K-1.8 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | Conn_01x22 | Connector_FFC-FPC:Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal | J3 |
| 1 | MIC5504-2.8YM5 | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | Micro_SD_Card_Det1 | Connector_Card:SD_Hirose_DM1AA_SF_PEJ82 | J5 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4085 | J7 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U5 |
Similar boards
- 4 layers101.6 × 101.6 mm
Avionus Flight Controller
leptun/Avionus_Flight_Controller
Controller board for autonomous RC plane
287 parts1GPL-3.0 - 2 layers
- 2 layers99 × 97 mm
Digicamera
vatsgoyal27/circuitbending_camera
building a digicam ith points exposed for experimental circuit bending
90 parts1 - 4 layers27 × 55.5 mm
NS FPGA V2 iCE
uzzambutt/NorthernStudios-iCE40-UltraPlus-FPGA-Dev-Board
NorthernStudios iCE40 UltraPlus FPGA Dev Board
70 parts1MIT - 6 layers50 × 50 mm
- 4 layers96.8 × 51 mm
Pocketmuseum edu v0
radutolontan/BASM_Pocket_Museum
The Pocket Lab is the next-generation approach to science education. Designed by the Bucharest Applied STEAM Museum, it brings scientific exploration into anyone's hands.
114 parts1 - 4 layers61.8 × 27.5 mm
Audio Processing HW V1.0
aitesam961/OpenADSP
An Embedded Digital Signal Processing Device for Audio signals.
83 parts4GPL-3.0
Questions
How big is the Cherrycam PCB?
It measures 100 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Cherrycam use?
55 parts, built around the W25Q128JVSIQ, AP2112K-1.8, AP2112K-3.3 and MIC5504-2.8YM5-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cherrycam KiCad files?
From the LucasHT22/lucam repository on GitHub, at the commit this page was made from: the board is cherrycam/cherrycam.kicad_pcb and its schematic cherrycam/cherrycam.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cherrycam design in my own project?
Its repository states no licence, so its author keeps all rights: ask LucasHT22 before reusing the design.