
SmartPot
LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.
SHT-31 module is an open-source printed circuit board by LuCy4n3, from the LuCy4n3/SmartPotProject repository on GitHub. It is a 2-layer board of 12 × 9.9 mm with 6 parts on 6 nets, routed with 40 tracks and 0 vias.
Its parts include 2 resistors, 2 connectors, 1 capacitor and 1 IC.
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp. For this apps to run locally it is required to change the launchSettings file on both .NET apps and changing the URLs in the android app.
This is the link to proof of concept video: https://www.youtube.com/watch?v=sH559vDkE20&t=21s&ab_channel=RaulSimonca
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 20kOhm | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | SHT31A-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U1 |

LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

LuCy4n3/SmartPotProject
This are all the apps required, except Programmer I didn't code that, for the SmartPot PCB too work with the app GreenGrowApp.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.


Jcparkyn/dpoint
Open-source digital stylus using camera tracking and inertial measurements

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

It measures 12 × 9.9 mm and has 2 copper layers, 1.6 mm thick.
6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LuCy4n3/SmartPotProject repository on GitHub, at the commit this page was made from: the board is PCB/Modules/SHT-31-module/SHT-31_module/SHT-31_module.kicad_pcb and its schematic PCB/Modules/12V-PMOS-5v-drive-sw/12v-SW-5v-COM/12v-SW-5v-COM.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LuCy4n3 before reusing the design.