
Sensors
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

Paper, also see this repo for expanded design.
Mag touch2x2 is an open-source printed circuit board by LowiekVDS, from the LowiekVDS/Open-source-Magnetic-Tactile-Sensor repository on GitHub. It is a 4-layer board of 18 × 31 mm with 14 parts on 16 nets, routed with 220 tracks and 17 vias.
Paper, also see this repo for expanded design.
This repo contains the design files for a magnetic tactile fingertip presented at the ViTac workshop at ICRA2024, you can read the paper here. The fingertip has four taxels in a 2-by-2 grid. We developed a calibration method to be used with a robotic arm with integrated F/T sensor. In the paper, the fingertip is mounted to (a gripper the arm and pushed against an external probe to collect calibration data. It is crucial that the mounting of the fingertip to the robot is rigid. We have noticed that this is not sufficiently the case when mounting the fingertip to a Robotiq 2F-85 gripper. A Schunk EGK-40 gave better results.
This work was expanded upon by designing a 4-by-8 grid as well, together with a more reliable calibration method where the sensor is mounted to the table, see this repo.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | , , , | ||
| 4 | 2POS_INTERFACE | magtouch:2POS_INTERFACE | I2, I3, I4, I5 |
| 4 | ~ | magtouch:QFN50P300X300X100-17N | M00, M01, M10, M11 |
| 1 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 2POS_INTERFACE | magtouch:4POS_INTERFACE | I1 |

StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.


nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


BelaPlatform/Trill
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.
It measures 18 × 31 mm and has 4 copper layers, 1.6 mm thick.
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LowiekVDS/Open-source-Magnetic-Tactile-Sensor repository on GitHub, at the commit this page was made from: the board is Design/2x2/PCB - KiCad/mag_touch2x2/mag_touch2x2.kicad_pcb and its schematic Design/2x2/PCB - KiCad/mag_touch2x2/mag_touch2x2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LowiekVDS before reusing the design.