
Ledify
notaroomba/ledify
A super small addressable LED controller with USB-C PD up to 100W, a switchable 5V/12V output and Bluetooth!

A STEMMA QT board using the Texas Instrument's OPT4001 ambient light sensor
OPT4001 is an open-source printed circuit board by LordsBoards, from the LordsBoards/OPT4001-STEMMA-QT-Light-Sensor repository on GitHub. It is a 4-layer board of 26.7 × 20.3 mm with 17 parts on 13 nets, routed with 95 tracks and 18 vias.
It is built around the OPT4001DNPRQ1. Its parts include 4 resistors, 3 capacitors, 3 connectors and 2 ICs. It belongs with the sensors and measurement boards of this library.
A custom STEMMA QT compatible board featuring the OPT4001 high-precision ambient light sensor in SOT-5X3 package.
Features
Specs
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | OPT4001_MountingHole:MountingHole_2.5mm_Pad | H1, H2, H3, H4 |
| 3 | 10kR | Resistor_SMD:R_0402_1005Metric | R3, R4, R6 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | Conn_01x04_MountingPin | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J1, J2 |
| 1 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1 |
| 1 | 1MR | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | OPT4001DNPRQ1 | OPT4001_Package_TO_SOT_SMD:SOT-5X3 | U1 |
| 1 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | XC6206PxxxMR | Package_TO_SOT_SMD:SOT-23-3 | U2 |

notaroomba/ledify
A super small addressable LED controller with USB-C PD up to 100W, a switchable 5V/12V output and Bluetooth!

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!





brown-studios/minuet
Minuet upgrades your MAXXAIR Maxxfan with a brushless DC motor, home automation features, and accessories.
It measures 26.7 × 20.3 mm and has 4 copper layers, 1.6 mm thick.
17 parts, built around the OPT4001DNPRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LordsBoards/OPT4001-STEMMA-QT-Light-Sensor repository on GitHub, at the commit this page was made from: the board is OPT4001.kicad_pcb and its schematic OPT4001.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask LordsBoards before reusing the design.