
OSO BOOK C1
joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.

Repository for my first RP2354 based dev board
RP2354B DevBoard v1 is an open-source printed circuit board by LordAfterEight, from the LordAfterEight/RP2354B-DevBoard-v1 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 31.4 × 53.4 mm with 38 parts on 95 nets, routed with 418 tracks and 54 vias.
Its parts include 17 capacitors, 7 resistors, 3 ICs, 1 connector and 1 inductor. It belongs with the microcontroller boards boards and the RP2350 boards of this library.
Repository for my first RP2354 based dev board
This dev board comes without external flash and only uses the 2MB of flash that come with the RP2354B chip, thus making this board only compatible with this specific version of the chip.
The two rows of pin headers are simply GPIO 0 - 19 on one side and GPIO 20 - 39 on the other. This means that the ADC pins of the RP2354B can not be used on this board as they're simply unconnected.
VBUS is directly connected to the micro-usb connector. 3V3/VSYS is connected to the output of the voltage regulator.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C9, C10, C11, C12, C13, C14, C15, C16 |
| 4 | 4.7µF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C3, C4, C5, C7 |
| 3 | 1kOhm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R5, R6 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C8, C17 |
| 2 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2 |
| 2 | 27Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | VBUS1, VSYS1 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H8mm | BOOTSEL, RESET |
| 1 | 100Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | 12MHz | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y2 |
| 1 | 33Ohm | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | <value> | RF_Module:RMC20452T | U3 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | GPIO_33-39 |
| 1 | Conn_01x13_Pin | Connector_PinHeader_2.54mm:PinHeader_1x13_P2.54mm_Vertical | GPIO_20-32 |
| 1 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | GPIO_0-19 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | PWR |
| 1 | L_Small | Inductor_SMD:L_Coilcraft_0805HQ_2012Metric | L1 |
| 1 | NCP1117-3.3_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | RP2350_80QFN | Package_DFN_QFN:QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm_ThermalVias | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J1 |

joeycastillo/The-Open-Book
For details on how to build, test and use Open Book, I've made documentation available here.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.


It measures 31.4 × 53.4 mm and has 2 copper layers, 1.6 mm thick.
38 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LordAfterEight/RP2354B-DevBoard-v1 repository on GitHub, at the commit this page was made from: the board is kicad-files/RP2354B-DevBoard-v1.kicad_pcb and its schematic kicad-files/RP2354B-DevBoard-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).