4 layers35 × 20 mm
4 layers
Rigel b hw
Longhorn-Rocketry-Electronics/Rigel- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 58
- Nets
- 80
- Pads
- 249
- Tracks, vias
- 65, 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Oct 2023
- Updated
- 1 Mar 2025
Overview
Rigel b hw is an open-source printed circuit board by Longhorn-Rocketry-Electronics, from the Longhorn-Rocketry-Electronics/Rigel repository on GitHub. It is a 4-layer board with 58 parts on 80 nets, routed with 65 tracks and 3 vias.
It is built around the BALFHB-WL-02D3, SAM-M10Q-00B and CH340X, with the KH-SMA-K513-G, MSK12C02-HB and TYPE-C 16PIN 2MD(073) among its other parts. Its parts include 31 capacitors, 10 ICs, 7 resistors, 4 inductors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
9
BALFHB-WL-02D3
CSPG-8-40℃~+105℃ 0.85dB 28dB、31dB、33dB、37dB、43dB、46dB、48dB、52dB、62dB 50Ω 862MHz~928MHz Bandpass CSPG-8 RF Filters ROHSSTMicroelectronicsRF Filters
SAM-M10Q-00B
LGA-20Hot start acceleration LGA-20 GNSS Modules ROHSu-bloxGNSS Modules
CH340X
MSOP-10-20℃~+70℃ 2Mbps 3.3V、5V USB 2.0 USB to serial、USB to Parallel MSOP-10 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
KH-SMA-K513-G
插件-55℃~+155℃ 1 50Ω 6GHz Board Side Elbow Inner Bore SMA 插件 Coaxial Connectors (RF) ROHSkinghelmCoaxial Connectors (RF)
MSK12C02-HB
SMD,8x2.8mm-25℃~+70℃ 1.4mm 10,000 cycles 12V 2.8mm 50mA 8mm Black Rectangular Columnar SMD(SMT) Tab SPDT Surface Mount, Right Angle SMD,8x2.8mm Slide Switches ROHSSHOU HANSlide Switches
TYPE-C 16PIN 2MD(073)
SMD-25℃~+85℃ 1 10 thousand cycles 16P 3A 5V Black Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSSHOU HANUSB Connectors
BCS-102-L-D-TE
插件,P=2.54mm-55℃~+125℃ 2 2.54mm 2.54mm 4.6A 475V 4P 7.37mm Phosphor bronze Square Hole Through Hole Tin 插件,P=2.54mm Female Headers ROHSSamtecFemale Headers
GZ2012D601TF
0805-55℃~+125℃ 1 300mΩ 500mA 600Ω@100MHz ±25% 0805 Ferrite Beads ROHSSunlordFerrite Beads
S2B-XH-A
弯插,P=2.5mm-25℃~+85℃ 1 11.5mm 1x2P 2 2.5mm 250V 2P 3A 6.1mm 7.4mm Brass K Pin PA66 Right Angle Tin UL94V-0 White XH 弯插,P=2.5mm Wire To Board Connector ROHSJSTWire To Board Connector
README
README.mdRigel
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100nF | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C10, C11, C12, C13, C19, C23, C24, C25, C26 |
| 3 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C9, C14, C16 |
| 2 | 0805G_(Green) | jlc:LED0805-R-RD | LED1, LED2 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 68 | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 68pF | Capacitor_SMD:C_0603_1608Metric | C1, C28 |
| 2 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 0 | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | 100pF | Capacitor_SMD:C_0402_1005Metric | C21 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 10pF | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 15uH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L2 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 22pF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C15 |
| 1 | 27.4k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 33pF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 4.7k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C29 |
| 1 | 4259-63 | jlc:SC-70-6_PSM | U10 |
| 1 | 47nF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | 47nH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 68pF | Capacitor_SMD:C_0402_1005Metric | C22 |
| 1 | BALFHB-WL-02D3 | jlc:BALFHBWL02D3 | IC1 |
| 1 | BCS-102-L-D-TE | jlc:CON4_2X2_TU_BCS_SAI | J4 |
| 1 | CH340X | jlc:MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U3 |
| 1 | GZ2012D601TF | jlc:L0805 | L1 |
| 1 | KH-SMA-K513-G | jlc:ANT-TH_KH-SMA-K513-G | U6 |
| 1 | MSK12C02-HB | jlc:SW-TH_MSK12C02-HB-1 | U7 |
| 1 | S2B-XH-A | jlc:CONN_S2B-XH-A_JST | J5 |
| 1 | SAM-M10Q-00B | jlc:SAM-M10Q_UBL | U8 |
| 1 | STM32WLE5C8Ux | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | TPS629206DRLR | jlc:SOT5X3-8_DRL_TEX | U2 |
| 1 | TYPE-C_16PIN_2MD(073) | jlc:USB-C-SMD_TYPE-C-6PIN-2MD-073 | U4 |
| 1 | X1G004131004200 | jlc:OSC-SMD_4P-L2.0-W1.6-BL_EPSON_TG-5006CJ-19H | U5 |
More from Longhorn-Rocketry-Electronics/Rigel
1Similar boards
- 4 layers85 × 100 mm
RTK GPS Board Rev0
rtymk/RT_Open_GPS_Board
Open source RTK GPS board for agricultural applications. LC29HEA GNSS reciever, E22 -900m33s LoRa Radio, 1x RS232 Out, 1x RS232 In, 2x CAN Trasncievers
111 partsMIT - 2 layers79 × 30 mm
LIA
JGAguado/LIA
Low-power pet tracking platform built around Meshtastic and LoRa mesh networking
81 parts29 - 4 layers67.7 × 43.9 mm
STM32Lora Tempreture sensor
AndreyPodlesni/stm32wl-lora-rf-pcb
4-layer RF PCB design of a low-power LoRa sensor node based on STM32WLE5CCU6, featuring 50Ω controlled impedance RF routing, SMA antenna interface, and HDC2022 temperature & humidity sensor. Designed in KiCad.
60 parts2MIT - 4 layers15.9 × 33.8 mm
- 2 layers22.5 × 14.5 mm
Lora module
ben5049/Smart-Watch
This project aims to take a cheap, common smart watch and upgrade it by replacing the screen and all internal electronics with custom hardware.
27 partsApache-2.0 - 2 layers70 × 100 mm
- 2 layers142.9 × 80.2 mm
Bifrost left
hringdrifi/bifrost
KiCad source files for the left half of Bifrǫst.
66 parts5CERN-OHL-P-2.0 - 2 layers80 × 40 mm
Cryptick token pcb
alphaseneca/cryptick-token-pcb
Hardware schematics, 2-layer PCB layout, and manufacturing files for Cryptick Token — the 100% open-source biometric hardware security key and cryptographic hardware enclave.
56 partsMIT
Questions
What parts does the Rigel b hw use?
58 parts, built around the BALFHB-WL-02D3, SAM-M10Q-00B, CH340X and KH-SMA-K513-G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Rigel b hw KiCad files?
From the Longhorn-Rocketry-Electronics/Rigel repository on GitHub, at the commit this page was made from: the board is rigel-b-tx/rigel-b-hw/rigel-b-hw.kicad_pcb and its schematic rigel-a-rx/rigel-a-hw/rigel-a-hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Rigel b hw design in my own project?
Its repository states no licence, so its author keeps all rights: ask Longhorn-Rocketry-Electronics before reusing the design.