
Type f
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

A remix of the Sweep that has a tweaked shape and aims to have a cleaner looking design.
Clean sweep faceupmcu roundedbacktraces is an open-source printed circuit board by LilyRose2798, from the LilyRose2798/clean-sweep repository on GitHub, published under the MIT licence. It is a 2-layer board of 107.2 × 86.8 mm with 25 parts on 24 nets, routed with 207 tracks and 5 vias.
Its parts include 17 switches, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
A remix of the Sweep (based on the original Ferris) that has a tweaked shape and aims to have a cleaner looking design (in particular the layout of the traces).
There are 8 total variations, with each possible combination of the following options:
All designs include just the left half and are reversible, but keep in mind that reversing the pcb also means the traces will be on the opposite side and the MCU will have to be flipped over, so if you wanted to have both a left and right side with front traces and a face down MCU, then you'd need to make both the face down MCU / back traces version and a face up MCU / front traces version (that you would then flip over to use for the right half).




| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | SW_Push | clean-sweep:Kailh-PG1350-1u-reversible | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 +1 |
| 2 | MountingHole_Pad | clean-sweep:VIA-1.4mm | BAT+1, BATGND1 |
| 1 | G***** | clean-sweep:Bee | Bee |
| 1 | ProMicro | clean-sweep:ProMicro | U1 |
| 1 | SW_Push | clean-sweep:SW_SPST_B3U-1000P-reversible | RSW1 |
| 1 | SW_SPDT | clean-sweep:SW_SPDT_MSK-12C02-reversible | PWRSW1 |
| 1 | TRRS | clean-sweep:TRRS-PJ-320A-reversible | J1 |
| 1 | Tenting Puck | clean-sweep:TentingPuck | TP1 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

xyphro/UsbGpib
Versatile, cheap and portable USB to GPIB converter (USBTMC class based)


jes/scamp-cpu
A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

It measures 107.2 × 86.8 mm and has 2 copper layers, 1.6 mm thick.
25 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LilyRose2798/clean-sweep repository on GitHub, at the commit this page was made from: the board is clean-sweep-faceupmcu-roundedbacktraces/clean-sweep-faceupmcu-roundedbacktraces.kicad_pcb and its schematic clean-sweep-facedownmcu-roundedbacktraces/clean-sweep-facedownmcu-roundedbacktraces.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).