Skip to the content
2 layers70 × 59.8 mmChompBlack, the printed circuit board in 3D

Inkscape and Kicad files for my Shitty Add-On PCBs - Shy Guy and Chain Chomp

Size
70 × 59.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
5
Pads
17
Tracks, vias
15, 0
Pours
6
Routed
Yes
KiCad
KiCad 4
Created
20 Jul 2018
Updated
20 Jul 2018

Overview

ChompBlack is an open-source printed circuit board by LifeOnAFarm, from the LifeOnAFarm/SAO-PCB-Art repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 59.8 mm with 14 parts on 5 nets, routed with 15 tracks and 0 vias.

Its parts include 5 diodes, 1 resistor and 1 crystal.

README

README.md

SAO PCB Art

Created in the lead up to DefCon 26 #BadgeLife

Getting Started

Welcome to a collection of my PCB Shitty Add-On (SAO) files.

Here you will find svg images, schematics, gerbers and all the Kicad files you need to edit and make your own SAO PCB. I recommend @MrTwinkleTwink's video on how to convert svg images to Kicad files using Inkscape if you want to make any board chances (https://youtu.be/61NFK9KW).

Chain Chomp

BadgeImage

Components You Will Need:

  • 1 x 0.1" 2x2 Female Headers

  • 5 x 1206 LEDS (Solder these with the top of the LED facing towards the PCB board)

  • 1 x 2512 51 ohm Resistor

Shy Guy

BadgeImage

Components You Will Need:

  • 1 x 0.1" 2x2 Female Headers

  • 2 x 1206 LEDS (Solder these with the top of the LED facing towards the PCB board)

  • 1 x 2512 51 ohm Resistor

Authors

  • Seamus de Cleir (@PotatoNightmare)

License

This project is licensed under the MIT License.

All I ask is that you leave my Twitter handle on the back of the board, thanks. - see the LICENSE.md file for more details

Acknowledgments

@MrTwinkleTwink for the great tutorial on SAO's

Donations

A button to buy me a cup of coffee if you see fit

Donate

Parts

14
QtyValueFootprintReferences
6LOGOLOGOG***, G***, G***, G***, G***, G***
5LEDLEDs:LED_1206_HandSolderingD1, D2, D3, D4, D5
1Wire_Pads:SolderWirePad_single_0-8mmDrill
1Badgelife_shitty_connectorShitty:Badgelife-Shitty-2x2X1
1R51Resistors_SMD:R_2512_HandSolderingR1

More from LifeOnAFarm/SAO-PCB-Art

1
  • 2 layers60.7 × 79.2 mmShy Guy PCB 3, the printed circuit board in 3D

    Shy Guy PCB 3

    LifeOnAFarm/SAO-PCB-Art

    Inkscape and Kicad files for my Shitty Add-On PCBs - Shy Guy and Chain Chomp

    9 parts7MIT

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the ChompBlack PCB?

It measures 70 × 59.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ChompBlack use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ChompBlack KiCad files?

From the LifeOnAFarm/SAO-PCB-Art repository on GitHub, at the commit this page was made from: the board is Chain Chomp/ChompBlack.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the ChompBlack design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).